Haisheng Li , Yefei Li , Qiaoling Zheng , Huicong Zhao , Dawei Yi , Yihui Wang , Peipei He , Yanan Chen
{"title":"Influence of structure parameters on the tribological properties of MoB/Cu laminated composites","authors":"Haisheng Li , Yefei Li , Qiaoling Zheng , Huicong Zhao , Dawei Yi , Yihui Wang , Peipei He , Yanan Chen","doi":"10.1016/j.wear.2024.205549","DOIUrl":null,"url":null,"abstract":"<div><p>Strong-bonding MoB/Cu laminated (MCL) composites are fabricated by the hot-press method at 1030 °C for 1 h under 20 MPa pressure. The microstructure, tribological properties, and elemental microanalysis are systematically investigated. The structure parameters of laminated composites play a key role in the properties of friction and wear resistance. The average friction coefficient is below 0.3 and the wear rate is almost one order of magnitude lower when the measured ratio of copper thickness to MoB thickness is below 4, compared with the sample whose λ equals 13. The primary phases of MCL are Al<sub>2</sub>O<sub>3</sub>, Cu(Al), and MoB. They helped the lubricating film to form on the worn surface during the wear process. These tribo-films effectively moderate the wear while safeguarding the metal matrix.</p></div>","PeriodicalId":23970,"journal":{"name":"Wear","volume":"558 ","pages":"Article 205549"},"PeriodicalIF":5.3000,"publicationDate":"2024-08-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Wear","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0043164824003144","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0
Abstract
Strong-bonding MoB/Cu laminated (MCL) composites are fabricated by the hot-press method at 1030 °C for 1 h under 20 MPa pressure. The microstructure, tribological properties, and elemental microanalysis are systematically investigated. The structure parameters of laminated composites play a key role in the properties of friction and wear resistance. The average friction coefficient is below 0.3 and the wear rate is almost one order of magnitude lower when the measured ratio of copper thickness to MoB thickness is below 4, compared with the sample whose λ equals 13. The primary phases of MCL are Al2O3, Cu(Al), and MoB. They helped the lubricating film to form on the worn surface during the wear process. These tribo-films effectively moderate the wear while safeguarding the metal matrix.
期刊介绍：
Wear journal is dedicated to the advancement of basic and applied knowledge concerning the nature of wear of materials. Broadly, topics of interest range from development of fundamental understanding of the mechanisms of wear to innovative solutions to practical engineering problems. Authors of experimental studies are expected to comment on the repeatability of the data, and whenever possible, conduct multiple measurements under similar testing conditions. Further, Wear embraces the highest standards of professional ethics, and the detection of matching content, either in written or graphical form, from other publications by the current authors or by others, may result in rejection.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
