Feasibility of Stationary Cycling with Pedal Force Visual Feedback Post-Total Knee Arthroplasty: Implications for Inter-Limb Deficits in Knee Joint Biomechanics.

IF 3.8 3区 医学 Q2 ENGINEERING, BIOMEDICAL Bioengineering Pub Date : 2024-08-20 DOI:10.3390/bioengineering11080850
Erik T Hummer, Jared Porter, Harold Cates, Songning Zhang
{"title":"Feasibility of Stationary Cycling with Pedal Force Visual Feedback Post-Total Knee Arthroplasty: Implications for Inter-Limb Deficits in Knee Joint Biomechanics.","authors":"Erik T Hummer, Jared Porter, Harold Cates, Songning Zhang","doi":"10.3390/bioengineering11080850","DOIUrl":null,"url":null,"abstract":"<p><p>The purpose of this study was to assess the biomechanical adaptations prompted by stationary cycling paired with visual feedback of vertical pedal reaction forces during both stationary cycling and overground walking for patients who underwent a total knee arthroplasty (TKA). Specifically, an emphasis on the inter-limb deficits in knee joint biomechanics were examined. Ten patients who underwent a TKA took part in an acute intervention with pre- and post-testing measurements of kinematics (240 Hz) and kinetics (1200 Hz) during stationary cycling and overground walking. The intervention phase consisted of six cycling sessions during which participants were provided with visual feedback of their bilateral peak vertical pedal reaction force, with instructions to maintain a symmetrical loading between limbs. A 2 × 2 (work rate/speed × time) repeated measures ANOVA (α = 0.05) was conducted on key outcome variables. Peak knee extension moment asymmetry during stationary cycling significantly improved (<i>p</i> = 0.038, η<sup>2</sup><sub>p</sub> = 0.610) following the acute intervention. Walking velocities for both preferred (<i>p</i> = 0.001, d = 0.583) and fast (<i>p</i> = 0.002, d = 0.613) walking speeds displayed improvements from pre- to post-testing. Significant improvements in the total score (<i>p</i> = 0.009, d = 0.492) and ADL subscale score (<i>p</i> = 0.041, d = 0.270) for the Knee Injury and Osteoarthritis Outcome Score were present following the acute intervention. Stationary cycling with visual feedback may be beneficial post-TKA; however, further investigation is merited.</p>","PeriodicalId":8874,"journal":{"name":"Bioengineering","volume":null,"pages":null},"PeriodicalIF":3.8000,"publicationDate":"2024-08-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11351697/pdf/","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bioengineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3390/bioengineering11080850","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, BIOMEDICAL","Score":null,"Total":0}
引用次数: 0

Abstract

The purpose of this study was to assess the biomechanical adaptations prompted by stationary cycling paired with visual feedback of vertical pedal reaction forces during both stationary cycling and overground walking for patients who underwent a total knee arthroplasty (TKA). Specifically, an emphasis on the inter-limb deficits in knee joint biomechanics were examined. Ten patients who underwent a TKA took part in an acute intervention with pre- and post-testing measurements of kinematics (240 Hz) and kinetics (1200 Hz) during stationary cycling and overground walking. The intervention phase consisted of six cycling sessions during which participants were provided with visual feedback of their bilateral peak vertical pedal reaction force, with instructions to maintain a symmetrical loading between limbs. A 2 × 2 (work rate/speed × time) repeated measures ANOVA (α = 0.05) was conducted on key outcome variables. Peak knee extension moment asymmetry during stationary cycling significantly improved (p = 0.038, η2p = 0.610) following the acute intervention. Walking velocities for both preferred (p = 0.001, d = 0.583) and fast (p = 0.002, d = 0.613) walking speeds displayed improvements from pre- to post-testing. Significant improvements in the total score (p = 0.009, d = 0.492) and ADL subscale score (p = 0.041, d = 0.270) for the Knee Injury and Osteoarthritis Outcome Score were present following the acute intervention. Stationary cycling with visual feedback may be beneficial post-TKA; however, further investigation is merited.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
全膝关节置换术后利用踏板力视觉反馈进行静态自行车运动的可行性:膝关节生物力学中肢体间缺陷的影响。
本研究的目的是评估固定自行车运动与垂直踏板反作用力视觉反馈相结合,对接受全膝关节置换术(TKA)的患者在固定自行车运动和地面行走过程中的生物力学适应性。具体来说,研究重点是膝关节生物力学中的肢体间缺陷。十名接受了全膝关节置换术的患者参加了一项急性干预措施,在固定骑自行车和地面行走过程中对运动学(240 Hz)和动力学(1200 Hz)进行了前后测试测量。干预阶段包括六次骑车训练,在此期间,参与者可获得其双侧垂直踏板反作用力峰值的视觉反馈,并指示其保持肢体间的对称负荷。对主要结果变量进行了 2 × 2(工作率/速度 × 时间)重复测量方差分析(α = 0.05)。急性干预后,固定骑车时膝关节伸展力矩峰值不对称性明显改善(p = 0.038,η2p = 0.610)。首选步行速度(p = 0.001,d = 0.583)和快速步行速度(p = 0.002,d = 0.613)从测试前到测试后均有所改善。急性干预后,膝关节损伤和骨关节炎结果评分的总分(p = 0.009,d = 0.492)和 ADL 子量表得分(p = 0.041,d = 0.270)均有显著改善。带有视觉反馈的静态骑行可能会在 TKA 术后带来益处;但是,还需要进一步的研究。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Bioengineering
Bioengineering Chemical Engineering-Bioengineering
CiteScore
4.00
自引率
8.70%
发文量
661
期刊介绍: Aims Bioengineering (ISSN 2306-5354) provides an advanced forum for the science and technology of bioengineering. It publishes original research papers, comprehensive reviews, communications and case reports. Our aim is to encourage scientists to publish their experimental and theoretical results in as much detail as possible. All aspects of bioengineering are welcomed from theoretical concepts to education and applications. There is no restriction on the length of the papers. The full experimental details must be provided so that the results can be reproduced. There are, in addition, four key features of this Journal: ● We are introducing a new concept in scientific and technical publications “The Translational Case Report in Bioengineering”. It is a descriptive explanatory analysis of a transformative or translational event. Understanding that the goal of bioengineering scholarship is to advance towards a transformative or clinical solution to an identified transformative/clinical need, the translational case report is used to explore causation in order to find underlying principles that may guide other similar transformative/translational undertakings. ● Manuscripts regarding research proposals and research ideas will be particularly welcomed. ● Electronic files and software regarding the full details of the calculation and experimental procedure, if unable to be published in a normal way, can be deposited as supplementary material. ● We also accept manuscripts communicating to a broader audience with regard to research projects financed with public funds. Scope ● Bionics and biological cybernetics: implantology; bio–abio interfaces ● Bioelectronics: wearable electronics; implantable electronics; “more than Moore” electronics; bioelectronics devices ● Bioprocess and biosystems engineering and applications: bioprocess design; biocatalysis; bioseparation and bioreactors; bioinformatics; bioenergy; etc. ● Biomolecular, cellular and tissue engineering and applications: tissue engineering; chromosome engineering; embryo engineering; cellular, molecular and synthetic biology; metabolic engineering; bio-nanotechnology; micro/nano technologies; genetic engineering; transgenic technology ● Biomedical engineering and applications: biomechatronics; biomedical electronics; biomechanics; biomaterials; biomimetics; biomedical diagnostics; biomedical therapy; biomedical devices; sensors and circuits; biomedical imaging and medical information systems; implants and regenerative medicine; neurotechnology; clinical engineering; rehabilitation engineering ● Biochemical engineering and applications: metabolic pathway engineering; modeling and simulation ● Translational bioengineering
期刊最新文献
Contrast-Enhancing Lesion Segmentation in Multiple Sclerosis: A Deep Learning Approach Validated in a Multicentric Cohort. Driving Deployment of Bioengineered Products-An Arduous, Sometimes Tedious, Challenging, Rewarding, Most Exciting Journey That Has to Be Made! Evaluation of Load on Cervical Disc Prosthesis by Imposing Complex Motion: Multiplanar Motion and Combined Rotational-Translational Motion. Bovine Placentome-Derived Extracellular Matrix: A Sustainable 3D Scaffold for Cultivated Meat. Comparative Study of Alternative Methods for Measuring Leg Length Discrepancy after Robot-Assisted Total Hip Arthroplasty.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1