{"title":"Fracture mechanics of bi-material lattice metamaterials","authors":"","doi":"10.1016/j.jmps.2024.105835","DOIUrl":null,"url":null,"abstract":"<div><p>The advent of additive manufacturing technology empowers precise control of multi-material components or specific defects in lightweight lattice metamaterials, however, fracture mechanics and toughening design strategies in such metamaterials remain enigmatic. By incorporating theoretical analysis, numerical simulation, and experimental investigation, our study reveals that stretch-bend synergistic strut deformations caused by bi-material components or topology defects contribute notably tougher lattice structures surpassing its ideal single-material lattices. A peak fracture energy at a critical modulus ratio was found in a designed bi-material lattice composed of triangular soft struts and hexagonal stiff struts, which originates from the shift of fracture modes at crack tip from strut bending to stretching dominated failure modes as the modulus of soft struts increases, where the compromise in competition between bending-enhanced and stretching-weakened energy dissipations of struts deformations results in the maximized fracture energy. A parametric design protocol was proposed to optimize fracture energy of bi-material lattices through tuning the modulus ratio and relative density. Furthermore, the concept of stretch-bend synergistic toughening can also be applied to make tougher single-material lattices with specific topological defects. Our findings not only provide physical insights into directing crack propagation but also provide quantitative guidance to optimize fracture resistance within low-density tough lattice metamaterials.</p></div>","PeriodicalId":17331,"journal":{"name":"Journal of The Mechanics and Physics of Solids","volume":null,"pages":null},"PeriodicalIF":5.0000,"publicationDate":"2024-08-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of The Mechanics and Physics of Solids","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0022509624003016","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0
Abstract
The advent of additive manufacturing technology empowers precise control of multi-material components or specific defects in lightweight lattice metamaterials, however, fracture mechanics and toughening design strategies in such metamaterials remain enigmatic. By incorporating theoretical analysis, numerical simulation, and experimental investigation, our study reveals that stretch-bend synergistic strut deformations caused by bi-material components or topology defects contribute notably tougher lattice structures surpassing its ideal single-material lattices. A peak fracture energy at a critical modulus ratio was found in a designed bi-material lattice composed of triangular soft struts and hexagonal stiff struts, which originates from the shift of fracture modes at crack tip from strut bending to stretching dominated failure modes as the modulus of soft struts increases, where the compromise in competition between bending-enhanced and stretching-weakened energy dissipations of struts deformations results in the maximized fracture energy. A parametric design protocol was proposed to optimize fracture energy of bi-material lattices through tuning the modulus ratio and relative density. Furthermore, the concept of stretch-bend synergistic toughening can also be applied to make tougher single-material lattices with specific topological defects. Our findings not only provide physical insights into directing crack propagation but also provide quantitative guidance to optimize fracture resistance within low-density tough lattice metamaterials.
期刊介绍:
The aim of Journal of The Mechanics and Physics of Solids is to publish research of the highest quality and of lasting significance on the mechanics of solids. The scope is broad, from fundamental concepts in mechanics to the analysis of novel phenomena and applications. Solids are interpreted broadly to include both hard and soft materials as well as natural and synthetic structures. The approach can be theoretical, experimental or computational.This research activity sits within engineering science and the allied areas of applied mathematics, materials science, bio-mechanics, applied physics, and geophysics.
The Journal was founded in 1952 by Rodney Hill, who was its Editor-in-Chief until 1968. The topics of interest to the Journal evolve with developments in the subject but its basic ethos remains the same: to publish research of the highest quality relating to the mechanics of solids. Thus, emphasis is placed on the development of fundamental concepts of mechanics and novel applications of these concepts based on theoretical, experimental or computational approaches, drawing upon the various branches of engineering science and the allied areas within applied mathematics, materials science, structural engineering, applied physics, and geophysics.
The main purpose of the Journal is to foster scientific understanding of the processes of deformation and mechanical failure of all solid materials, both technological and natural, and the connections between these processes and their underlying physical mechanisms. In this sense, the content of the Journal should reflect the current state of the discipline in analysis, experimental observation, and numerical simulation. In the interest of achieving this goal, authors are encouraged to consider the significance of their contributions for the field of mechanics and the implications of their results, in addition to describing the details of their work.