Investigation of axis-fitting-based measurement and identification techniques for kinematic parameters in multi-joint industrial robots

Abstract

To improve the positioning accuracy of industrial robots and meet the requirements of industrial applications, this study begins with the structural design of multi-jointed industrial robots and proposes a kinematic calibration method based on axis fitting. The proposed method introduces an axis fitting technique based on circle fitting. Utilizing the results of the axis fitting, a method for establishing link coordinate systems by referencing the Modified Denavit-Hartenberg (MD-H) model is presented. Subsequently, a kinematic parameter identification method is proposed. This study primarily investigates the impact of joint rotation angles on the accuracy of axis fitting. The study reveals that when the rotation angle is greater than or equal to 20°, the circularity of the circle fitting is less than 0.008 mm, and the planarity is less than 0.01 mm, indicating that the proposed fitting algorithm meets the required precision for small angle rotations. Finally, the positioning accuracy of the target robot is verified according to ISO 9283:1998. After calibration, the positioning accuracy at point P₁ improves from 1.64 mm to 0.46 mm, an enhancement of 71.95 %, which is the most significant improvement. At point P₂, the positioning accuracy improves from 1.75 mm to 0.69 mm, an enhancement of 60.5 %, which is the least improvement. The advantage of this method lies in its ability to identify kinematic parameters that align with the actual structure of the robot using a simple measurement method, thereby improving the robot's positioning accuracy.