Experimental study on the stability of noncohesive landslide dams based on seepage effect

Abstract

Landslide dams composed of unconsolidated, noncohesive soil are easily affected by seepage. As seepage develops, the dam's characteristics change dynamically, indirectly affecting its stability. However, previous studies on dam failure have mostly assumed that the dam characteristics remain constant before failure, often overlooking these changes and their effects on stability. In this study, 48 sets of flume experiments were conducted to quantify the impact of seepage under varying upstream inflow rates, dam heights, downstream slope angles, and particle size distributions. During the storage phase, the rise rate of the water level is closely linked to the seepage's diversion capacity. The diversion rate of inflow reached as high as 0.747 in this study, but decreased to 0.230 as inflow increased. Furthermore, changes in the internal stress distribution within the dam, driven by seepage, contributed to dam settlement and the sliding of the downstream slope. Notably, dam settlement exhibited both non-uniform spatial distribution and temporal stage development. The maximum settlement ratio between the point in the upstream breach and the point in the downstream breach reached as high as 2.79. Regarding the soil changes within the dam, after the seepage channel became connected, the primary soil loss involved silt particles ranging from 10 to 20 μm in size. This result reflects the increasing non-uniformity within the dam caused by seepage. Finally, Considering the changes in dam characteristics under the influence of seepage, in this study, a logistic regression model was established to assess dam stability. Overall, this study enhances the understanding of how seepage affects dam stability by examining various dam properties and presenting a model for stability assessment.