Effect of low temperature on fatigue crack propagation behavior of QP980 steel and laser-welded joint

IF 2.7 4区 材料科学 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY Materials Letters Pub Date : 2024-09-02 DOI:10.1016/j.matlet.2024.137326
{"title":"Effect of low temperature on fatigue crack propagation behavior of QP980 steel and laser-welded joint","authors":"","doi":"10.1016/j.matlet.2024.137326","DOIUrl":null,"url":null,"abstract":"<div><p>This paper aims to investigate the fatigue crack propagation behavior of quenching and partitioning 980 steel (as base metal) and its welded joint at low-temperature environments. The fatigue crack propagation tests are carried out at 25°C, −40°C and −80°C under <em>R</em>=0.1, 0.3 and 0.5. The results show that the fatigue crack propagation threshold value increases and fatigue crack propagation rate decrease of base metal, whereas welded joint behaved opposite results as the temperature decreases. The fatigue ductility to brittle transition temperature of base metal is lower than that of welded joint. Compared with the welded joint, the base metal has higher fatigue resistance.</p></div>","PeriodicalId":384,"journal":{"name":"Materials Letters","volume":null,"pages":null},"PeriodicalIF":2.7000,"publicationDate":"2024-09-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials Letters","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0167577X24014666","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

This paper aims to investigate the fatigue crack propagation behavior of quenching and partitioning 980 steel (as base metal) and its welded joint at low-temperature environments. The fatigue crack propagation tests are carried out at 25°C, −40°C and −80°C under R=0.1, 0.3 and 0.5. The results show that the fatigue crack propagation threshold value increases and fatigue crack propagation rate decrease of base metal, whereas welded joint behaved opposite results as the temperature decreases. The fatigue ductility to brittle transition temperature of base metal is lower than that of welded joint. Compared with the welded joint, the base metal has higher fatigue resistance.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
低温对 QP980 钢和激光焊接接头疲劳裂纹扩展行为的影响
本文旨在研究 980 钢(母材)及其焊接接头在低温环境下的疲劳裂纹扩展行为。在 R=0.1、0.3 和 0.5 的条件下,分别在 25°C、-40°C 和 -80°C 进行了疲劳裂纹扩展试验。结果表明,随着温度的降低,母材的疲劳裂纹扩展阈值增大,疲劳裂纹扩展速率降低,而焊接接头则表现出相反的结果。母材的疲劳韧性到脆性转变温度低于焊接接头。与焊接接头相比,母材具有更高的抗疲劳性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Materials Letters
Materials Letters 工程技术-材料科学:综合
CiteScore
5.60
自引率
3.30%
发文量
1948
审稿时长
50 days
期刊介绍: Materials Letters has an open access mirror journal Materials Letters: X, sharing the same aims and scope, editorial team, submission system and rigorous peer review. Materials Letters is dedicated to publishing novel, cutting edge reports of broad interest to the materials community. The journal provides a forum for materials scientists and engineers, physicists, and chemists to rapidly communicate on the most important topics in the field of materials. Contributions include, but are not limited to, a variety of topics such as: • Materials - Metals and alloys, amorphous solids, ceramics, composites, polymers, semiconductors • Applications - Structural, opto-electronic, magnetic, medical, MEMS, sensors, smart • Characterization - Analytical, microscopy, scanning probes, nanoscopic, optical, electrical, magnetic, acoustic, spectroscopic, diffraction • Novel Materials - Micro and nanostructures (nanowires, nanotubes, nanoparticles), nanocomposites, thin films, superlattices, quantum dots. • Processing - Crystal growth, thin film processing, sol-gel processing, mechanical processing, assembly, nanocrystalline processing. • Properties - Mechanical, magnetic, optical, electrical, ferroelectric, thermal, interfacial, transport, thermodynamic • Synthesis - Quenching, solid state, solidification, solution synthesis, vapor deposition, high pressure, explosive
期刊最新文献
Fabrication of VOOH hollow spheres for ammonium-ion supercapacitors Realizing preparation of zinc anode through regulating electrodeposition current density for aqueous zinc-ion batteries Carbon-coated MoS2/Mxene hybrids for enhanced Li-ions storage performance Behavior of high-velocity oxygen fuel sprayed chromium-coating on Zircaloy-4 fuel cladding under loss-of-coolant accident conditions Cryogenic fracture toughness of high manganese steel joint and 7 %Ni steel joint welded with nickel-based filler metal
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1