{"title":"YAG:Dy co-doped with Tb for lifetime-based phosphor thermometry from room temperature to 1600 °C","authors":"","doi":"10.1016/j.sna.2024.115890","DOIUrl":null,"url":null,"abstract":"<div><p>Phosphor thermometry has demonstrated significant potential for nondestructive high-temperature measurements in gas turbines. To expand the measurement range through lifetime-based phosphor thermometry, we developed a novel phosphor, YAG:Dy co-doped with Tb (YAG:Dy,Tb). Three YAG:Dy,Tb samples with varying Tb concentrations were synthesized through the sol–gel method. A fiber-optic-coupled measurement system was established to capture multiple emission peaks of YAG co-doped with Dy<sup>3+</sup> and Tb<sup>3+</sup> at 544 nm, 484 nm, and 458 nm. Efficient energy transfer from Dy<sup>3+</sup> to Tb<sup>3+</sup> resulted in a substantial enhancement of Tb<sup>3+</sup> emission at 544 nm under 355 nm excitation. Owing to the energy transfer, the temperature measurement range under the lifetime method was extended from room temperature to 1600 °C using the combination of Tb<sup>3+</sup> emission at 544 nm and Dy<sup>3+</sup> emission at 458 nm. YAG:Dy,Tb samples with higher concentrations of Tb<sup>3+</sup> exhibited superior temperature measurement performance, mainly owing to their stronger signal-to-noise ratio at >1000 °C. The performances of different emission peaks were also compared according to temperature uncertainty, which generally ranged from 0.1 °C to 2.7 °C across the entire measurement range.</p></div>","PeriodicalId":21689,"journal":{"name":"Sensors and Actuators A-physical","volume":null,"pages":null},"PeriodicalIF":4.1000,"publicationDate":"2024-09-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sensors and Actuators A-physical","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0924424724008847","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0
Abstract
Phosphor thermometry has demonstrated significant potential for nondestructive high-temperature measurements in gas turbines. To expand the measurement range through lifetime-based phosphor thermometry, we developed a novel phosphor, YAG:Dy co-doped with Tb (YAG:Dy,Tb). Three YAG:Dy,Tb samples with varying Tb concentrations were synthesized through the sol–gel method. A fiber-optic-coupled measurement system was established to capture multiple emission peaks of YAG co-doped with Dy3+ and Tb3+ at 544 nm, 484 nm, and 458 nm. Efficient energy transfer from Dy3+ to Tb3+ resulted in a substantial enhancement of Tb3+ emission at 544 nm under 355 nm excitation. Owing to the energy transfer, the temperature measurement range under the lifetime method was extended from room temperature to 1600 °C using the combination of Tb3+ emission at 544 nm and Dy3+ emission at 458 nm. YAG:Dy,Tb samples with higher concentrations of Tb3+ exhibited superior temperature measurement performance, mainly owing to their stronger signal-to-noise ratio at >1000 °C. The performances of different emission peaks were also compared according to temperature uncertainty, which generally ranged from 0.1 °C to 2.7 °C across the entire measurement range.
期刊介绍:
Sensors and Actuators A: Physical brings together multidisciplinary interests in one journal entirely devoted to disseminating information on all aspects of research and development of solid-state devices for transducing physical signals. Sensors and Actuators A: Physical regularly publishes original papers, letters to the Editors and from time to time invited review articles within the following device areas:
• Fundamentals and Physics, such as: classification of effects, physical effects, measurement theory, modelling of sensors, measurement standards, measurement errors, units and constants, time and frequency measurement. Modeling papers should bring new modeling techniques to the field and be supported by experimental results.
• Materials and their Processing, such as: piezoelectric materials, polymers, metal oxides, III-V and II-VI semiconductors, thick and thin films, optical glass fibres, amorphous, polycrystalline and monocrystalline silicon.
• Optoelectronic sensors, such as: photovoltaic diodes, photoconductors, photodiodes, phototransistors, positron-sensitive photodetectors, optoisolators, photodiode arrays, charge-coupled devices, light-emitting diodes, injection lasers and liquid-crystal displays.
• Mechanical sensors, such as: metallic, thin-film and semiconductor strain gauges, diffused silicon pressure sensors, silicon accelerometers, solid-state displacement transducers, piezo junction devices, piezoelectric field-effect transducers (PiFETs), tunnel-diode strain sensors, surface acoustic wave devices, silicon micromechanical switches, solid-state flow meters and electronic flow controllers.
Etc...