Fatigue strength of repair-welded headed studs

Abstract

Welded connections of headed studs are highly stressed details in bridge structures in steel-concrete composite construction and are largely responsible for the functionality of the supporting structures. At the same time, this detail requires a lot of resources due to the high welding effort and therefore has a major influence on the economic success. An important criterion for the economic and ecological balance of the structure is the durability of the welded joint, which is quantified by the fatigue strength. The welding of headed studs for composite bridges is usually carried out using fully mechanised drawn arc stud welding in accordance with EN ISO 14555. Due to the process, stud welds that do not fulfil the standard requirements for flawless condition may occur in individual cases. The design rules for stud load-bearing capacity in accordance with EN 1994-2 are based on tests and only apply to connections produced using drawn arc stud welding. In the past, there were practicable and tacitly accepted solutions for repairing such sporadically occurring faulty welds, but these were never systematically investigated. Particularly against the background of fatigue loading, repair-welded stud connections are now to be systematically investigated in a project funded by the AIF. The article provides an overview of the execution of stud welded joints and presents the tests planned in the project in order to achieve a practicable recommendation for the repair welding of headed studs.