High-performance P2-type Na0.7Co0.1Fe0.1Mn0.8O2 cathode materials for sodium-ion batteries

IF 2.6 4区 化学 Q3 ELECTROCHEMISTRY Journal of Solid State Electrochemistry Pub Date : 2024-09-07 DOI:10.1007/s10008-024-06055-6
De-xin Liu, Teng-yue Ma, Jin-ling An, Jin-rong Liu, Wei-yan He
{"title":"High-performance P2-type Na0.7Co0.1Fe0.1Mn0.8O2 cathode materials for sodium-ion batteries","authors":"De-xin Liu, Teng-yue Ma, Jin-ling An, Jin-rong Liu, Wei-yan He","doi":"10.1007/s10008-024-06055-6","DOIUrl":null,"url":null,"abstract":"<p>Sodium-ion batteries are gaining broad application prospects in the field of new energy due to their high energy density, low cost, and good safety. However, the irreversible phase transformation of layered oxides during charge and discharge cycles limits their long-term cycling performance and practicality. This article utilizes the sol–gel method to prepare a stable Na<sub>0.7</sub>MnO<sub>2</sub> (NMO) crystal phase and explores the effects of double doping with Fe and Co on the microstructure and electrochemical properties of Na<sub>0.7</sub>MnO<sub>2</sub>. The XRD pattern indicates that Fe and Co ions were successfully incorporated into the lattice of the Na-Mn–O system, stabilizing the P2 crystal phase and increasing the sodium layer spacing. Na<sub>0.7</sub>Co<sub>0.1</sub>Fe<sub>0.1</sub>Mn<sub>0.8</sub>O<sub>2</sub>(NCFMO) can deliver an initial capacity of 109.78 mAh/g, with an average operating voltage of 3 V, and retains a capacity retention rate of 96.31% after 100 cycles. Moreover, at a current density of 0.2 C and a voltage range of 1.5–4.5 V, the cycle charge–discharge specific capacity reaches 226.08 and 159.3 mAh/g, respectively, demonstrating excellent cycle and rate performance.</p><h3 data-test=\"abstract-sub-heading\">Graphical abstract</h3><p>The cycle performance of the material Na<sub>0.7</sub>Co<sub>0.1</sub>Fe<sub>0.1</sub>Mn<sub>0.8</sub>O<sub>2</sub> in different voltage ranges is tested in the figure, and it shows excellent performance in the voltage range of 1.5–4.5 V.</p>\n","PeriodicalId":665,"journal":{"name":"Journal of Solid State Electrochemistry","volume":"126 1","pages":""},"PeriodicalIF":2.6000,"publicationDate":"2024-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Solid State Electrochemistry","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s10008-024-06055-6","RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ELECTROCHEMISTRY","Score":null,"Total":0}
引用次数: 0

Abstract

Sodium-ion batteries are gaining broad application prospects in the field of new energy due to their high energy density, low cost, and good safety. However, the irreversible phase transformation of layered oxides during charge and discharge cycles limits their long-term cycling performance and practicality. This article utilizes the sol–gel method to prepare a stable Na0.7MnO2 (NMO) crystal phase and explores the effects of double doping with Fe and Co on the microstructure and electrochemical properties of Na0.7MnO2. The XRD pattern indicates that Fe and Co ions were successfully incorporated into the lattice of the Na-Mn–O system, stabilizing the P2 crystal phase and increasing the sodium layer spacing. Na0.7Co0.1Fe0.1Mn0.8O2(NCFMO) can deliver an initial capacity of 109.78 mAh/g, with an average operating voltage of 3 V, and retains a capacity retention rate of 96.31% after 100 cycles. Moreover, at a current density of 0.2 C and a voltage range of 1.5–4.5 V, the cycle charge–discharge specific capacity reaches 226.08 and 159.3 mAh/g, respectively, demonstrating excellent cycle and rate performance.

Graphical abstract

The cycle performance of the material Na0.7Co0.1Fe0.1Mn0.8O2 in different voltage ranges is tested in the figure, and it shows excellent performance in the voltage range of 1.5–4.5 V.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
用于钠离子电池的高性能 P2- 型 Na0.7Co0.1Fe0.1Mn0.8O2 正极材料
钠离子电池由于能量密度高、成本低、安全性好,在新能源领域有着广阔的应用前景。然而,层状氧化物在充放电循环过程中的不可逆相变限制了其长期循环性能和实用性。本文利用溶胶-凝胶法制备了稳定的 Na0.7MnO2 (NMO) 晶相,并探讨了铁和钴的双重掺杂对 Na0.7MnO2 微观结构和电化学性能的影响。XRD 图谱表明,Fe 和 Co 离子成功地掺入了 Na-Mn-O 体系的晶格中,稳定了 P2 晶相并增加了钠层间距。在平均工作电压为 3 V 时,Na0.7Co0.1Fe0.1Mn0.8O2(NCFMO)的初始容量为 109.78 mAh/g,循环 100 次后的容量保持率为 96.31%。此外,在 0.2 C 的电流密度和 1.5-4.5 V 的电压范围内,循环充放电比容量分别达到 226.08 和 159.3 mAh/g,表现出优异的循环性能和速率性能。图文摘要图中测试了 Na0.7Co0.1Fe0.1Mn0.8O2 材料在不同电压范围内的循环性能,在 1.5-4.5 V 的电压范围内表现出优异的性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
4.80
自引率
4.00%
发文量
227
审稿时长
4.1 months
期刊介绍: The Journal of Solid State Electrochemistry is devoted to all aspects of solid-state chemistry and solid-state physics in electrochemistry. The Journal of Solid State Electrochemistry publishes papers on all aspects of electrochemistry of solid compounds, including experimental and theoretical, basic and applied work. It equally publishes papers on the thermodynamics and kinetics of electrochemical reactions if at least one actively participating phase is solid. Also of interest are articles on the transport of ions and electrons in solids whenever these processes are relevant to electrochemical reactions and on the use of solid-state electrochemical reactions in the analysis of solids and their surfaces. The journal covers solid-state electrochemistry and focusses on the following fields: mechanisms of solid-state electrochemical reactions, semiconductor electrochemistry, electrochemical batteries, accumulators and fuel cells, electrochemical mineral leaching, galvanic metal plating, electrochemical potential memory devices, solid-state electrochemical sensors, ion and electron transport in solid materials and polymers, electrocatalysis, photoelectrochemistry, corrosion of solid materials, solid-state electroanalysis, electrochemical machining of materials, electrochromism and electrochromic devices, new electrochemical solid-state synthesis. The Journal of Solid State Electrochemistry makes the professional in research and industry aware of this swift progress and its importance for future developments and success in the above-mentioned fields.
期刊最新文献
Voltammetric determination of hydroxymethylfurfural in honey using screen-printed carbon electrodes: optimization and in-house validation tests Comparative analysis of pH sensing performance of nitrogen-doped ZnO on screen-printed silver and carbon electrodes Effect of electrodeposition of AuPt nanostructure thin films on the electrocatalytic activity of counter electrodes: DSSCs application Study of superhydrophobicity and corrosion resistance of electrodeposited Zn-Ni-HDTMS coating Screen-printed carbon electrode modified with AgNPs obtained via green synthesis for acetaminophen determination
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1