Study of the impurity dissolution kinetics, rheological characterization, and hydrodynamic aspects during the bioleaching of iron ore pulp in a bioreactor

IF 2.2 4区 工程技术 Q2 MECHANICS Korea-Australia Rheology Journal Pub Date : 2024-09-09 DOI:10.1007/s13367-024-00104-2
Luis Antonio Ramirez-Torres, Diola Marina Nuñez-Ramirez, Luis Medina-Torres, Octavio Manero
{"title":"Study of the impurity dissolution kinetics, rheological characterization, and hydrodynamic aspects during the bioleaching of iron ore pulp in a bioreactor","authors":"Luis Antonio Ramirez-Torres, Diola Marina Nuñez-Ramirez, Luis Medina-Torres, Octavio Manero","doi":"10.1007/s13367-024-00104-2","DOIUrl":null,"url":null,"abstract":"<p>This research aims to study the rheological behavior and impurities dissolution kinetics in a bioleaching process of two particle sizes and three different pulp densities, which are analyzed and compared. It was found that the small particle size with 40% (w/w) pulp density provides the maximum dissolution of impurities in the shortest bioleaching time (in 2 days). Furthermore, through a CFD simulation in a system with 40% (w/w) pulp density and 44 μm particle size, a stirring speed of 700 rpm provides the best mixing conditions in the bioreactor, enabling good distribution of recirculation zones and adequate streamline patterns with a viscosity map that minimizes regions of high and low viscosity.</p><h3 data-test=\"abstract-sub-heading\">Graphical abstract</h3>","PeriodicalId":683,"journal":{"name":"Korea-Australia Rheology Journal","volume":"15 1","pages":""},"PeriodicalIF":2.2000,"publicationDate":"2024-09-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Korea-Australia Rheology Journal","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s13367-024-00104-2","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

Abstract

This research aims to study the rheological behavior and impurities dissolution kinetics in a bioleaching process of two particle sizes and three different pulp densities, which are analyzed and compared. It was found that the small particle size with 40% (w/w) pulp density provides the maximum dissolution of impurities in the shortest bioleaching time (in 2 days). Furthermore, through a CFD simulation in a system with 40% (w/w) pulp density and 44 μm particle size, a stirring speed of 700 rpm provides the best mixing conditions in the bioreactor, enabling good distribution of recirculation zones and adequate streamline patterns with a viscosity map that minimizes regions of high and low viscosity.

Graphical abstract

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
在生物反应器中对铁矿石矿浆进行生物浸出过程中的杂质溶解动力学、流变特性和流体力学方面的研究
本研究旨在研究两种粒度和三种不同纸浆密度的生物浸出过程中的流变行为和杂质溶解动力学,并对其进行分析和比较。研究发现,粒度小、纸浆密度为 40%(重量比)的颗粒能在最短的生物浸出时间内(2 天内)最大限度地溶解杂质。此外,通过对纸浆密度为 40%(重量比)、粒径为 44 μm 的系统进行 CFD 模拟,700 转/分钟的搅拌速度为生物反应器提供了最佳的混合条件,使再循环区分布良好,流线形态适当,粘度图最大限度地减少了高粘度和低粘度区域。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Korea-Australia Rheology Journal
Korea-Australia Rheology Journal 工程技术-高分子科学
CiteScore
2.80
自引率
0.00%
发文量
28
审稿时长
>12 weeks
期刊介绍: The Korea-Australia Rheology Journal is devoted to fundamental and applied research with immediate or potential value in rheology, covering the science of the deformation and flow of materials. Emphases are placed on experimental and numerical advances in the areas of complex fluids. The journal offers insight into characterization and understanding of technologically important materials with a wide range of practical applications.
期刊最新文献
Effect of stirring time on viscoelastic properties of liquid gallium-oxide amalgams Study of the impurity dissolution kinetics, rheological characterization, and hydrodynamic aspects during the bioleaching of iron ore pulp in a bioreactor Construction of self-stacking nanostructure with MXene and CNT through dopamine polymerization The rheological behaviors, aging properties, and thermal stability of chain extended poly(butylene adipate-co-terephthalate) The computational method with the deformed mesh interfaces for an incompressible layer indentation by rigid indenters with arbitrary axisymmetric smooth profiles
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1