Metastable zone width and nucleation kinetics of vanillyl alcohol crystallization in various solvents

Abstract

In this study, linear cooling batch crystallization of vanillyl alcohol using a laser power system was carried out to experimentally measure the metastable zone widths of vanillyl alcohol in selected solvents (ethanol, 2-propanol, and methyl cyanide) at various saturated temperatures (40, 50, and 60 °C), cooling rates (0.5, 1, 1.5, and 2 °C/min), and agitation speeds (300, 400 rpm). Besides, the sonocrystallization of vanillyl alcohol in ethanol was conducted for measuring MSZW at a various ultrasonic amplitudes (0 %, 25 %, 50 %, and 100 %) at a fixed temperature of 40 °C, cooling rate of 1 °C/min, and agitation speed of 300 rpm. For all three solvents, the MSZW decreases with saturation temperature, while it increases with cooling rate, and this trend doesn’t change for different agitation speeds. Three models—the self-consistent Nývlt-like model, the classical 3D nucleation theory model, and the simplified linear integral model based on classical nucleation theory (CNT)—were employed to estimate the nucleation kinetic parameters for vanillyl alcohol in three solvents. The goodness fit of the models were checked by the coefficient of determination (R-squared). The R-squared values reflected a very good fit between the experimental and predicted values and implied that the models are reliable to estimate nucleation kinetic parameters. Additionally, the interfacial energy between vanillyl alcohol and the solvents was observed to decrease with increasing temperature. Overall, the results indicate that a low nucleation order and low interfacial energy suggest weak solute–solvent interactions, making nucleation easier in the following order: methyl cyanide > ethanol > 2-propanol.