RAFT polymerization assisted P(NIPAm-co-AAc)-AEMR integrated PVA hydrogels: Dual responsive features, texture analysis, and cytotoxicity studies

IF 4.5 3区 工程技术 Q1 CHEMISTRY, APPLIED Reactive & Functional Polymers Pub Date : 2024-09-12 DOI:10.1016/j.reactfunctpolym.2024.106052
P.A. Parvathy , Sriparna De , Manjinder Singh , Gaurav Manik , Sushanta K. Sahoo
{"title":"RAFT polymerization assisted P(NIPAm-co-AAc)-AEMR integrated PVA hydrogels: Dual responsive features, texture analysis, and cytotoxicity studies","authors":"P.A. Parvathy ,&nbsp;Sriparna De ,&nbsp;Manjinder Singh ,&nbsp;Gaurav Manik ,&nbsp;Sushanta K. Sahoo","doi":"10.1016/j.reactfunctpolym.2024.106052","DOIUrl":null,"url":null,"abstract":"<div><p>Modified P(NIPAm-co-AAc) copolymers are prepared using Radical Addition Fragmentation Chain Transfer (RAFT) copolymerization by varying the concentration of castor oil sourced acrylated epoxy methyl ricinoleate (AEMR). Subsequently, hydrogels are prepared by integrating copolymers with polyvinyl alcohol (PVA) via freeze-thaw process. The employment of RAFT polymerization yielded copolymers with dispersity (D) value of 1.2–1.3 revealing the formation of structurally well controlled polymer chains. The lower critical solution temperature (LCST) of the copolymers (∼30–35 °C) are tuned to the range of physiological temperature (∼37 °C) in PVA hydrogel system. Temperature dependent viscoelastic properties indicated that the characteristics of copolymeric solutions and hydrogels are composition dependent while undergoing noncovalent interactions and the conformational changes and the samples showed extremely elastic behaviour beyond LCST. Swelling ratio of hydrogels are also found to be pH dependent, which displayed higher swelling ratio in alkaline and reduced swelling ratio in acidic medium. Cytotoxicity studies with L929 cells showed that the copolymers and hydrogels exhibited desirable biocompatibility, which gets improved with AEMR concentrations. Thus, these dual responsive PA-AEMR-PVA smart hydrogels can be used as a viable functional material for possible bio-medical applications.</p></div>","PeriodicalId":20916,"journal":{"name":"Reactive & Functional Polymers","volume":"205 ","pages":"Article 106052"},"PeriodicalIF":4.5000,"publicationDate":"2024-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Reactive & Functional Polymers","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S138151482400227X","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, APPLIED","Score":null,"Total":0}
引用次数: 0

Abstract

Modified P(NIPAm-co-AAc) copolymers are prepared using Radical Addition Fragmentation Chain Transfer (RAFT) copolymerization by varying the concentration of castor oil sourced acrylated epoxy methyl ricinoleate (AEMR). Subsequently, hydrogels are prepared by integrating copolymers with polyvinyl alcohol (PVA) via freeze-thaw process. The employment of RAFT polymerization yielded copolymers with dispersity (D) value of 1.2–1.3 revealing the formation of structurally well controlled polymer chains. The lower critical solution temperature (LCST) of the copolymers (∼30–35 °C) are tuned to the range of physiological temperature (∼37 °C) in PVA hydrogel system. Temperature dependent viscoelastic properties indicated that the characteristics of copolymeric solutions and hydrogels are composition dependent while undergoing noncovalent interactions and the conformational changes and the samples showed extremely elastic behaviour beyond LCST. Swelling ratio of hydrogels are also found to be pH dependent, which displayed higher swelling ratio in alkaline and reduced swelling ratio in acidic medium. Cytotoxicity studies with L929 cells showed that the copolymers and hydrogels exhibited desirable biocompatibility, which gets improved with AEMR concentrations. Thus, these dual responsive PA-AEMR-PVA smart hydrogels can be used as a viable functional material for possible bio-medical applications.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
RAFT 聚合辅助 P(NIPAm-co-AAc)-AEMR 集成 PVA 水凝胶:双重响应特性、质地分析和细胞毒性研究
通过改变蓖麻油来源的丙烯酸环氧甲基蓖麻油酸酯(AEMR)的浓度,采用自由基加成碎片链转移(RAFT)共聚法制备改性 P(NIPAm-co-AAc)共聚物。随后,通过冻融过程将共聚物与聚乙烯醇(PVA)结合,制备出水凝胶。采用 RAFT 聚合工艺制备的共聚物的分散度(D)值为 1.2-1.3,表明聚合物链的形成在结构上得到了很好的控制。共聚物的低临界溶液温度(LCST)(∼30-35 °C)与 PVA 水凝胶体系的生理温度(∼37 °C)范围一致。与温度相关的粘弹性表明,共聚物溶液和水凝胶的特性与组成有关,同时还经历了非共价相互作用和构象变化,样品在 LCST 之后表现出极高的弹性。水凝胶的溶胀率也与 pH 值有关,在碱性介质中溶胀率较高,而在酸性介质中溶胀率较低。用 L929 细胞进行的细胞毒性研究表明,共聚物和水凝胶具有理想的生物相容性,并随着 AEMR 浓度的增加而得到改善。因此,这些双响应 PA-AEMR-PVA 智能水凝胶可作为一种可行的功能材料用于生物医学应用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Reactive & Functional Polymers
Reactive & Functional Polymers 工程技术-高分子科学
CiteScore
8.90
自引率
5.90%
发文量
259
审稿时长
27 days
期刊介绍: Reactive & Functional Polymers provides a forum to disseminate original ideas, concepts and developments in the science and technology of polymers with functional groups, which impart specific chemical reactivity or physical, chemical, structural, biological, and pharmacological functionality. The scope covers organic polymers, acting for instance as reagents, catalysts, templates, ion-exchangers, selective sorbents, chelating or antimicrobial agents, drug carriers, sensors, membranes, and hydrogels. This also includes reactive cross-linkable prepolymers and high-performance thermosetting polymers, natural or degradable polymers, conducting polymers, and porous polymers. Original research articles must contain thorough molecular and material characterization data on synthesis of the above polymers in combination with their applications. Applications include but are not limited to catalysis, water or effluent treatment, separations and recovery, electronics and information storage, energy conversion, encapsulation, or adhesion.
期刊最新文献
Corrigendum to “Preparation of polysulfone based rubidium ion imprinted membrane and its selective adsorption and separation performance” [Reactive and Functional Polymers 191(2023) 105696] Design of thermally triggered triple-shape memory ternary polymer blends for 4D printing applications Editorial Board Adjustment in physicochemical properties of PMMA particles through different photopolymerization methods to achieve their functional applications in various scenarios Energy and combustion performance of Al/PVDF composite films: Vapor-grown carbon fiber as a new additive
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1