Numerical Investigation on Mechanism Analysis of Bubble Pinch-off

IF 1.3 4区 工程技术 Q2 ENGINEERING, AEROSPACE Microgravity Science and Technology Pub Date : 2024-09-14 DOI:10.1007/s12217-024-10138-4
Meng Jia, Mingjun Pang
{"title":"Numerical Investigation on Mechanism Analysis of Bubble Pinch-off","authors":"Meng Jia, Mingjun Pang","doi":"10.1007/s12217-024-10138-4","DOIUrl":null,"url":null,"abstract":"<p>The studies on bubble pinch − off deviates to some degree from the actual situation due to limitations in theoretical assumptions and experimental conditions, and physical details such as satellite bubbles inside the bubble cannot be observed. Even some of the published experimental results are divergent. To fully understand the dynamics of bubble pinch − off, the authors applied the volume of fluid (VOF) method to investigate the effect of liquid − phase viscosity on bubble pinch − off, and analyzed the pinch − off process and the surrounding flow field. It was found that in low − viscosity liquids, the process of bubble pinch − off is relatively fast and the position corresponding to <i>R</i><sub><i>min</i></sub> varies only in the axial direction; and satellite bubbles during pinch − off shows vertical distribution, which enter the upper and lower parts with the jet after bubble pinch − off. In intermediate and high viscosity liquids, a gas line is formed after bubble pinch − off, and the length and duration of the gas line increase with an increase in liquid − phase viscosity; and the position corresponding to <i>R</i><sub><i>min</i></sub> moves not only radially inward, but also axially upward. In liquids of different viscosities, the strength of annular flow and the radial pressure drop are different, which leads to different phenomena of bubble pinch − off.</p>","PeriodicalId":707,"journal":{"name":"Microgravity Science and Technology","volume":null,"pages":null},"PeriodicalIF":1.3000,"publicationDate":"2024-09-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Microgravity Science and Technology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s12217-024-10138-4","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, AEROSPACE","Score":null,"Total":0}
引用次数: 0

Abstract

The studies on bubble pinch − off deviates to some degree from the actual situation due to limitations in theoretical assumptions and experimental conditions, and physical details such as satellite bubbles inside the bubble cannot be observed. Even some of the published experimental results are divergent. To fully understand the dynamics of bubble pinch − off, the authors applied the volume of fluid (VOF) method to investigate the effect of liquid − phase viscosity on bubble pinch − off, and analyzed the pinch − off process and the surrounding flow field. It was found that in low − viscosity liquids, the process of bubble pinch − off is relatively fast and the position corresponding to Rmin varies only in the axial direction; and satellite bubbles during pinch − off shows vertical distribution, which enter the upper and lower parts with the jet after bubble pinch − off. In intermediate and high viscosity liquids, a gas line is formed after bubble pinch − off, and the length and duration of the gas line increase with an increase in liquid − phase viscosity; and the position corresponding to Rmin moves not only radially inward, but also axially upward. In liquids of different viscosities, the strength of annular flow and the radial pressure drop are different, which leads to different phenomena of bubble pinch − off.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
气泡捏合机理分析的数值研究
由于理论假设和实验条件的限制,对气泡挤压的研究在一定程度上偏离了实际情况,而且无法观察到气泡内部的卫星气泡等物理细节。甚至一些已公布的实验结果也存在偏差。为了充分理解气泡夹断的动力学原理,作者采用流体体积(VOF)方法研究了液相粘度对气泡夹断的影响,并分析了夹断过程和周围流场。研究发现,在低粘度液体中,气泡夹灭过程相对较快,Rmin 所对应的位置仅在轴向发生变化;夹灭过程中的卫星气泡呈垂直分布,气泡夹灭后随射流进入上下两部分。在中粘度和高粘度液体中,气泡夹断后会形成气路,气路的长度和持续时间随着液相粘度的增加而增加;Rmin 对应的位置不仅径向向内移动,而且轴向向上移动。在不同粘度的液体中,环形流动的强度和径向压降不同,从而导致不同的气泡夹断现象。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Microgravity Science and Technology
Microgravity Science and Technology 工程技术-工程:宇航
CiteScore
3.50
自引率
44.40%
发文量
96
期刊介绍: Microgravity Science and Technology – An International Journal for Microgravity and Space Exploration Related Research is a is a peer-reviewed scientific journal concerned with all topics, experimental as well as theoretical, related to research carried out under conditions of altered gravity. Microgravity Science and Technology publishes papers dealing with studies performed on and prepared for platforms that provide real microgravity conditions (such as drop towers, parabolic flights, sounding rockets, reentry capsules and orbiting platforms), and on ground-based facilities aiming to simulate microgravity conditions on earth (such as levitrons, clinostats, random positioning machines, bed rest facilities, and micro-scale or neutral buoyancy facilities) or providing artificial gravity conditions (such as centrifuges). Data from preparatory tests, hardware and instrumentation developments, lessons learnt as well as theoretical gravity-related considerations are welcome. Included science disciplines with gravity-related topics are: − materials science − fluid mechanics − process engineering − physics − chemistry − heat and mass transfer − gravitational biology − radiation biology − exobiology and astrobiology − human physiology
期刊最新文献
Correlation Between Invariable Blood Proteins and Heart Rate Variability in Long-Duration Space Flights Numerical Investigation on Mechanism Analysis of Bubble Pinch-off Experimental Study on Startup Performance of a High-temperature Liquid Metal Heat Pipe with Fins Exploring the Frontier of Space Medicine: The Nexus of Bone Regeneration and Astronautic Health in Microgravity Conditions Study on the instability of FC-72 vapor–liquid interface in a rectangular channel under different gravity conditions
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1