Fill, Fold, Photo: Preconcentration and Multiplex Detection of Trace Level Heavy Metals in Water.

IF 8.2 1区 化学 Q1 CHEMISTRY, ANALYTICAL ACS Sensors Pub Date : 2024-10-25 Epub Date: 2024-09-23 DOI:10.1021/acssensors.4c01708
Prakash Aryal, Jason Boes, Eric Brack, Todd Alexander, Charles S Henry
{"title":"Fill, Fold, Photo: Preconcentration and Multiplex Detection of Trace Level Heavy Metals in Water.","authors":"Prakash Aryal, Jason Boes, Eric Brack, Todd Alexander, Charles S Henry","doi":"10.1021/acssensors.4c01708","DOIUrl":null,"url":null,"abstract":"<p><p>Heavy metal contamination is an increasing global threat to human and environmental health, particularly in resource-limited areas. Traditional platforms for heavy metal detection are labor intensive and expensive and require lab facilities. While paper-based colorimetric sensors offer a simpler approach, their sensitivity limitations prevent them from meeting legislative requirements for many metals. Existing preconcentration systems, on the other hand, can achieve lower detection limits but typically focus on analyzing only one metal, making comprehensive monitoring difficult. We address these limitations by introducing a low-cost preconcentration system coupled with colorimetric analysis for the simultaneous detection of seven metal ions at low ppb levels without the need for external equipment outside a smartphone. The system achieved detection limits of 15 ppb (Ni(II)), 7 ppb (Cu(II)), 2 ppb (Fe(III)), 20 ppb (Cr(VI)), 13 ppb (Pb(II)), 26 ppb (Hg(II)), and 15 ppb (Mn(II)) with six out of seven limits of detection values falling well below EPA regulatory guidelines for drinking water. The user-friendly Fill, Fold, Photo approach eliminates complex pretreatment steps. Smartphone-based detection offers portable quantification within seconds. Employing masking strategies ensured higher selectivity for each assay on the card, while our packaging protocols enable system stability for over 4 weeks of study, facilitating mass production and deployment within a realistic time frame. To validate the sensor's performance in real-world scenarios, the sensor was tested with environmental water samples. The sensor demonstrated good recovery, ranging from 77% to 94% compared to the standard ICP-MS method. Furthermore, spike recovery analysis confirmed the sensor's accuracy, with a relative standard deviation (RSD) of less than 15%. This technology holds significant promise for future development as a convenient, portable solution for field-based monitoring of a broad spectrum of water contaminants, including pesticides, PFAS, fertilizers, and beyond.</p>","PeriodicalId":24,"journal":{"name":"ACS Sensors","volume":" ","pages":"5479-5488"},"PeriodicalIF":8.2000,"publicationDate":"2024-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Sensors","FirstCategoryId":"92","ListUrlMain":"https://doi.org/10.1021/acssensors.4c01708","RegionNum":1,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2024/9/23 0:00:00","PubModel":"Epub","JCR":"Q1","JCRName":"CHEMISTRY, ANALYTICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Heavy metal contamination is an increasing global threat to human and environmental health, particularly in resource-limited areas. Traditional platforms for heavy metal detection are labor intensive and expensive and require lab facilities. While paper-based colorimetric sensors offer a simpler approach, their sensitivity limitations prevent them from meeting legislative requirements for many metals. Existing preconcentration systems, on the other hand, can achieve lower detection limits but typically focus on analyzing only one metal, making comprehensive monitoring difficult. We address these limitations by introducing a low-cost preconcentration system coupled with colorimetric analysis for the simultaneous detection of seven metal ions at low ppb levels without the need for external equipment outside a smartphone. The system achieved detection limits of 15 ppb (Ni(II)), 7 ppb (Cu(II)), 2 ppb (Fe(III)), 20 ppb (Cr(VI)), 13 ppb (Pb(II)), 26 ppb (Hg(II)), and 15 ppb (Mn(II)) with six out of seven limits of detection values falling well below EPA regulatory guidelines for drinking water. The user-friendly Fill, Fold, Photo approach eliminates complex pretreatment steps. Smartphone-based detection offers portable quantification within seconds. Employing masking strategies ensured higher selectivity for each assay on the card, while our packaging protocols enable system stability for over 4 weeks of study, facilitating mass production and deployment within a realistic time frame. To validate the sensor's performance in real-world scenarios, the sensor was tested with environmental water samples. The sensor demonstrated good recovery, ranging from 77% to 94% compared to the standard ICP-MS method. Furthermore, spike recovery analysis confirmed the sensor's accuracy, with a relative standard deviation (RSD) of less than 15%. This technology holds significant promise for future development as a convenient, portable solution for field-based monitoring of a broad spectrum of water contaminants, including pesticides, PFAS, fertilizers, and beyond.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
填充、折叠、拍照:水中痕量重金属的预浓缩和多重检测。
重金属污染是对人类和环境健康日益严重的全球性威胁,尤其是在资源有限的地区。传统的重金属检测平台劳动强度大、成本高,而且需要实验室设施。虽然纸质比色传感器提供了一种更简单的方法,但其灵敏度的限制使其无法满足许多金属的法定要求。另一方面,现有的预浓缩系统可以达到较低的检测限,但通常只侧重于分析一种金属,因此难以进行全面监测。为了解决这些局限性,我们推出了一种低成本的预浓缩系统,该系统结合了比色分析法,可同时检测ppb级以下的七种金属离子,而无需智能手机以外的外部设备。该系统的检测限分别为 15 ppb(Ni(II))、7 ppb(Cu(II))、2 ppb(Fe(III))、20 ppb(Cr(VI))、13 ppb(Pb(II))、26 ppb(Hg(II))和 15 ppb(Mn(II)),其中六个检测限值远低于美国环保署的饮用水监管准则。填装、折叠、拍照 "的用户友好型方法省去了复杂的预处理步骤。基于智能手机的检测可在数秒内实现便携式定量。采用掩蔽策略确保了检测卡上每项检测的更高选择性,而我们的包装协议使系统在超过 4 周的研究中保持稳定,从而促进了批量生产并在实际时间框架内进行部署。为了验证传感器在实际应用中的性能,我们用环境水样对传感器进行了测试。与标准的 ICP-MS 方法相比,传感器的回收率在 77% 到 94% 之间,表现良好。此外,尖峰回收分析证实了传感器的准确性,相对标准偏差(RSD)小于 15%。该技术作为一种方便、便携的解决方案,在未来的发展中大有可为,可用于现场监测各种水污染物,包括农药、全氟辛烷磺酸、化肥等。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
ACS Sensors
ACS Sensors Chemical Engineering-Bioengineering
CiteScore
14.50
自引率
3.40%
发文量
372
期刊介绍: ACS Sensors is a peer-reviewed research journal that focuses on the dissemination of new and original knowledge in the field of sensor science, particularly those that selectively sense chemical or biological species or processes. The journal covers a broad range of topics, including but not limited to biosensors, chemical sensors, gas sensors, intracellular sensors, single molecule sensors, cell chips, and microfluidic devices. It aims to publish articles that address conceptual advances in sensing technology applicable to various types of analytes or application papers that report on the use of existing sensing concepts in new ways or for new analytes.
期刊最新文献
Label-Free Single-Cell Cancer Classification from the Spatial Distribution of Adhesion Contact Kinetics. Digital CRISPR-Powered Biosensor Concept without Target Amplification Using Single-Impact Electrochemistry. Self-Powered, Flexible, Wireless and Intelligent Human Health Management System Based on Natural Recyclable Materials. Ultralow Potential Cathodic Electrochemiluminescence Aptasensor for Detection of Kanamycin Using Copper Nanoribbons as Coreaction Accelerator. A Three-Dimensional Surface-Adaptive Stretchable Sensor for Online Monitoring of Composite Materials Curing.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1