The deformation mechanism of low symmetric Ti–Pt intermetallic compounds containing high density of planar defects

Abstract

Intermetallic compounds typically exhibit limited plastic deformation capacity due to challenges in activating dislocation slip and deformation twinning, coupled with a lack of alternative deformation mechanisms. Ti–Pt alloys are a prevalent type of intermetallic compound utilized in high-temperature shape memory alloys and as materials for energy applications in electric fields. However, they often exhibit poor deformation capability. Here, we prepared a low-symmetry intermetallic phase, Ti₄Pt₃, which demonstrates significant plastic deformation capability. This phase features a high density of parallel planar defects, resulting in an exceptionally large lattice periodicity perpendicular to these defects. Through in-situ scanning electron microscope compression tests, we observed substantial plastic deformation in this new phase. Analysis of the deformed Ti₄Pt₃ phase revealed that the dense planar defects create uniformly distributed sites of internal stress concentration, enabling a rapid increase in back stress within crystals. This phenomenon leads to notable lattice rotation and localized order-disorder transitions, both crucial mechanisms facilitating plastic deformation and enhancing deformation capacity. Our research underscores the potential of leveraging structural asymmetry to enable unconventional deformation mechanisms, thereby enhancing the plasticity of intermetallic materials.