On the nonlinear dynamics of in-contact rigid bodies experiencing stick–slip and wear phenomena

IF 1.9 4区 工程技术 Q3 MECHANICS Continuum Mechanics and Thermodynamics Pub Date : 2024-10-03 DOI:10.1007/s00161-024-01331-2
Francesco D’Annibale, Arnaldo Casalotti
{"title":"On the nonlinear dynamics of in-contact rigid bodies experiencing stick–slip and wear phenomena","authors":"Francesco D’Annibale,&nbsp;Arnaldo Casalotti","doi":"10.1007/s00161-024-01331-2","DOIUrl":null,"url":null,"abstract":"<div><p>In this paper, the dynamic behavior of one degree-of-freedom oscillator subject to stick–slip and wear phenomena at the contact interface with a rigid substrate is investigated. The motion of the oscillator, induced by a harmonic excitation, depends on the tangential contact forces, exchanged with the rigid soil, which are modeled through piecewise nonlinear constitutive laws, accounting for stick–slip phenomena due to friction as well as wear due to abrasion, already developed by the authors in a previous work. The nonlinear ordinary differential equations governing the problem are derived, whose solution is numerically obtained via a typical Runge–Kutta-based algorithm. The main target of this study is to analyze and discuss the strong nonlinear behavior, descending from the presence of stick–slip and wear phenomena, thus investigating the effect of the different interface modeling. In this framework, the analysis is carried out considering the whole evolution of non-smooth contact laws, starting from the virgin interface.</p></div>","PeriodicalId":525,"journal":{"name":"Continuum Mechanics and Thermodynamics","volume":"36 6","pages":"1815 - 1831"},"PeriodicalIF":1.9000,"publicationDate":"2024-10-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s00161-024-01331-2.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Continuum Mechanics and Thermodynamics","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s00161-024-01331-2","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

Abstract

In this paper, the dynamic behavior of one degree-of-freedom oscillator subject to stick–slip and wear phenomena at the contact interface with a rigid substrate is investigated. The motion of the oscillator, induced by a harmonic excitation, depends on the tangential contact forces, exchanged with the rigid soil, which are modeled through piecewise nonlinear constitutive laws, accounting for stick–slip phenomena due to friction as well as wear due to abrasion, already developed by the authors in a previous work. The nonlinear ordinary differential equations governing the problem are derived, whose solution is numerically obtained via a typical Runge–Kutta-based algorithm. The main target of this study is to analyze and discuss the strong nonlinear behavior, descending from the presence of stick–slip and wear phenomena, thus investigating the effect of the different interface modeling. In this framework, the analysis is carried out considering the whole evolution of non-smooth contact laws, starting from the virgin interface.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
论经历粘滑和磨损现象的接触刚体的非线性动力学
本文研究了单自由度振荡器的动态行为,该振荡器与刚性基体的接触界面存在粘滑和磨损现象。振荡器在谐波激励下的运动取决于与刚性土壤交换的切向接触力,这些接触力通过片断非线性结构定律进行建模,考虑了摩擦引起的粘滑现象和磨损引起的磨损现象,作者在之前的工作中已经开发了这些模型。本文导出了控制该问题的非线性常微分方程,并通过基于 Runge-Kutta 的典型算法对其进行数值求解。本研究的主要目标是分析和讨论由粘滑和磨损现象产生的强非线性行为,从而研究不同界面建模的影响。在此框架下,分析从原始界面开始,考虑非光滑接触规律的整个演变过程。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
5.30
自引率
15.40%
发文量
92
审稿时长
>12 weeks
期刊介绍: This interdisciplinary journal provides a forum for presenting new ideas in continuum and quasi-continuum modeling of systems with a large number of degrees of freedom and sufficient complexity to require thermodynamic closure. Major emphasis is placed on papers attempting to bridge the gap between discrete and continuum approaches as well as micro- and macro-scales, by means of homogenization, statistical averaging and other mathematical tools aimed at the judicial elimination of small time and length scales. The journal is particularly interested in contributions focusing on a simultaneous description of complex systems at several disparate scales. Papers presenting and explaining new experimental findings are highly encouraged. The journal welcomes numerical studies aimed at understanding the physical nature of the phenomena. Potential subjects range from boiling and turbulence to plasticity and earthquakes. Studies of fluids and solids with nonlinear and non-local interactions, multiple fields and multi-scale responses, nontrivial dissipative properties and complex dynamics are expected to have a strong presence in the pages of the journal. An incomplete list of featured topics includes: active solids and liquids, nano-scale effects and molecular structure of materials, singularities in fluid and solid mechanics, polymers, elastomers and liquid crystals, rheology, cavitation and fracture, hysteresis and friction, mechanics of solid and liquid phase transformations, composite, porous and granular media, scaling in statics and dynamics, large scale processes and geomechanics, stochastic aspects of mechanics. The journal would also like to attract papers addressing the very foundations of thermodynamics and kinetics of continuum processes. Of special interest are contributions to the emerging areas of biophysics and biomechanics of cells, bones and tissues leading to new continuum and thermodynamical models.
期刊最新文献
An analytical model for debonding of composite cantilever beams under point loads Predictive models for bone remodeling during orthodontic tooth movement: a scoping review on the “biological metamaterial” periodontal ligament interface Mixed FEM implementation of three-point bending of the beam with an edge crack within strain gradient elasticity theory An enhanced beam model incorporating a hysteresis-based solid friction damping mechanism for cementitious materials A frequency-dependent model for bone remodeling using a micromorphic porous medium subjected to harmonic mechanical loading
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1