Drift when applying biocides to control crawling and flying insects on walls

Abstract

Background

Insecticides are sprayed on external building walls for treatments against crawling and flying insects. These applications can lead to drift into non-target areas and thus to undesirable environmental pollution. This emission pathway needs to be considered during exposure assessments within product authorisations to assess potential environmental risks. However, now, there is only one default value for deposition that is used in all calculations based on the Emission Scenario Document of the Organization for Economic Co-operation and Development at a distance of 50 cm to the treatment area. This is not sufficient for a risk assessment.

Results

When applying a chemical barrier of 50 cm at the bottom of the building wall, wind direction had the greatest influence on drift, while changing the nozzle type had no significant effect. Compared with the measured ground sediments, the OECD default value was deemed to be realistic at a distance of 57 cm from the treatment area. When treating the entire building wall, the wind direction as well as the nozzle used show significant influence on the measured values of drift. The default value for deposition proposed for modelling environmental exposure in OECD document ESD PT18 No. 18 was exceeded. Thus, the exposure estimation might not be protective enough.

Conclusion

Drift values used for the environmental exposure assessment of biocidal products during treatments of building walls should be adapted. This is especially relevant for treatments of entire building walls, where the current default value was exceeded for all distances from the building wall. Wind direction and nozzle type can reduce environmental impact. This finding can be used as a measure to reduce unnecessary exposure in the environment in the future.