Phonon-limited mobility for electrons and holes in highly-strained silicon

IF 9.4 1区 材料科学 Q1 CHEMISTRY, PHYSICAL npj Computational Materials Pub Date : 2024-10-12 DOI:10.1038/s41524-024-01425-0
Nicolas Roisin, Guillaume Brunin, Gian-Marco Rignanese, Denis Flandre, Jean-Pierre Raskin, Samuel Poncé
{"title":"Phonon-limited mobility for electrons and holes in highly-strained silicon","authors":"Nicolas Roisin, Guillaume Brunin, Gian-Marco Rignanese, Denis Flandre, Jean-Pierre Raskin, Samuel Poncé","doi":"10.1038/s41524-024-01425-0","DOIUrl":null,"url":null,"abstract":"<p>Strain engineering is a widely used technique for enhancing the mobility of charge carriers in semiconductors, but its effect is not fully understood. In this work, we perform first-principles calculations to explore the variations of the mobility of electrons and holes in silicon upon deformation by uniaxial strain up to 2% in the [100] crystal direction. We compute the <i>π</i><sub>11</sub> and <i>π</i><sub>12</sub> electron piezoresistances based on the low-strain change of resistivity with temperature in the range 200 K to 400 K, in excellent agreement with experiment. We also predict them for holes which were only measured at room temperature. Remarkably, for electrons in the transverse direction, we predict a minimum room-temperature mobility about 1200 cm<sup>2 </sup>V<sup>−1 </sup>s<sup>−1</sup> at 0.3% uniaxial tensile strain while we observe a monotonous increase of the longitudinal transport, reaching a value of 2200 cm<sup>2 </sup>V<sup>−1 </sup>s<sup>−1</sup> at high strain. We confirm these findings experimentally using four-point bending measurements, establishing the reliability of our first-principles calculations. For holes, we find that the transport is almost unaffected by strain up to 0.3% uniaxial tensile strain and then rises significantly, more than doubling at 2% strain. Our findings open new perspectives to boost the mobility by applying a stress in the [100] direction. This is particularly interesting for holes for which shear strain was thought for a long time to be the only way to enhance the mobility.</p>","PeriodicalId":19342,"journal":{"name":"npj Computational Materials","volume":null,"pages":null},"PeriodicalIF":9.4000,"publicationDate":"2024-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"npj Computational Materials","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1038/s41524-024-01425-0","RegionNum":1,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Strain engineering is a widely used technique for enhancing the mobility of charge carriers in semiconductors, but its effect is not fully understood. In this work, we perform first-principles calculations to explore the variations of the mobility of electrons and holes in silicon upon deformation by uniaxial strain up to 2% in the [100] crystal direction. We compute the π11 and π12 electron piezoresistances based on the low-strain change of resistivity with temperature in the range 200 K to 400 K, in excellent agreement with experiment. We also predict them for holes which were only measured at room temperature. Remarkably, for electrons in the transverse direction, we predict a minimum room-temperature mobility about 1200 cm2 V−1 s−1 at 0.3% uniaxial tensile strain while we observe a monotonous increase of the longitudinal transport, reaching a value of 2200 cm2 V−1 s−1 at high strain. We confirm these findings experimentally using four-point bending measurements, establishing the reliability of our first-principles calculations. For holes, we find that the transport is almost unaffected by strain up to 0.3% uniaxial tensile strain and then rises significantly, more than doubling at 2% strain. Our findings open new perspectives to boost the mobility by applying a stress in the [100] direction. This is particularly interesting for holes for which shear strain was thought for a long time to be the only way to enhance the mobility.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
高应变硅中电子和空穴的声子限制迁移率
应变工程是一种广泛应用于提高半导体中电荷载流子迁移率的技术,但其效果尚未得到充分了解。在这项工作中,我们进行了第一性原理计算,以探索硅中电子和空穴的迁移率在[100]晶体方向上发生高达 2% 的单轴应变变形时的变化。我们根据 200 K 至 400 K 范围内电阻率随温度的低应变变化计算出了π11 和π12 电子压阻,与实验结果非常吻合。我们还预测了仅在室温下测量的空穴的压阻。值得注意的是,对于横向电子,我们预测在 0.3% 单轴拉伸应变时,室温迁移率最小值约为 1200 cm2 V-1 s-1,而我们观察到纵向迁移率单调上升,在高应变时达到 2200 cm2 V-1 s-1。我们通过四点弯曲测量实验证实了这些发现,从而确立了第一原理计算的可靠性。对于空穴,我们发现在 0.3% 单轴拉伸应变之前,其传输几乎不受应变的影响,而在 2% 应变时,传输会显著增加一倍以上。我们的发现为通过在 [100] 方向施加应力来提高迁移率开辟了新的前景。这对于长期以来被认为是唯一能提高流动性的剪切应变孔来说尤其有趣。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
npj Computational Materials
npj Computational Materials Mathematics-Modeling and Simulation
CiteScore
15.30
自引率
5.20%
发文量
229
审稿时长
6 weeks
期刊介绍: npj Computational Materials is a high-quality open access journal from Nature Research that publishes research papers applying computational approaches for the design of new materials and enhancing our understanding of existing ones. The journal also welcomes papers on new computational techniques and the refinement of current approaches that support these aims, as well as experimental papers that complement computational findings. Some key features of npj Computational Materials include a 2-year impact factor of 12.241 (2021), article downloads of 1,138,590 (2021), and a fast turnaround time of 11 days from submission to the first editorial decision. The journal is indexed in various databases and services, including Chemical Abstracts Service (ACS), Astrophysics Data System (ADS), Current Contents/Physical, Chemical and Earth Sciences, Journal Citation Reports/Science Edition, SCOPUS, EI Compendex, INSPEC, Google Scholar, SCImago, DOAJ, CNKI, and Science Citation Index Expanded (SCIE), among others.
期刊最新文献
Active learning accelerated exploration of single-atom local environments in multimetallic systems for oxygen electrocatalysis MD-HIT: Machine learning for material property prediction with dataset redundancy control Accurate formation enthalpies of solids using reaction networks Unsupervised deep denoising for four-dimensional scanning transmission electron microscopy Phonon-limited mobility for electrons and holes in highly-strained silicon
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1