A novel conceptual design for self-healing of cracked cementitious composites incorporating two bacteria-based capsules

IF 12.7 1区 材料科学 Q1 ENGINEERING, MULTIDISCIPLINARY Composites Part B: Engineering Pub Date : 2024-10-03 DOI:10.1016/j.compositesb.2024.111872
Junchen Xiang , Jingping Qiu , Yuying Song , Yingliang Zhao , Xunchang Fei
{"title":"A novel conceptual design for self-healing of cracked cementitious composites incorporating two bacteria-based capsules","authors":"Junchen Xiang ,&nbsp;Jingping Qiu ,&nbsp;Yuying Song ,&nbsp;Yingliang Zhao ,&nbsp;Xunchang Fei","doi":"10.1016/j.compositesb.2024.111872","DOIUrl":null,"url":null,"abstract":"<div><div>Expanded polystyrene (EPS) is a low-density material prone to float during composite mixing and vibration. Inspired by this, a two-bacteria-capsule system was reported in this study to enhance the self-healing capacity of cracked mortar. Specifically, the BC-A capsule, containing aerobic bacteria, EPS, and superabsorbent polymer (SAP), and the BC-N capsule, containing anaerobic bacteria and SAP, are prepared through granulation using polyethylene glycol. Sulphoaluminate cement and epoxy resin are used to encapsulate the core materials. The BC-A capsules automatically float in the composite preparation process, while the BC-N capsules are distributed in the middle and bottom regions due to extrusion effect. Upon capsule rupture, the two types of bacteria are released in regions favorable for biomineralization, corresponding to the principle that oxygen concentration reduces along the crack depth. The self-healing behaviour was evaluated as well as the healing products were characterized. The results showed that the capsules cracked simultaneously with the composite and the coating effectively avoided premature release of the self-healing materials. Cementitious composites containing double capsules achieved 90 % closure of cracks with initial widths of 50–600 μm. The three-dimensional healing capacity was significantly enhanced, particularly in terms of impermeability and strength recovery ratio. The main healing products in the cracks were calcite and swollen SAP. The swollen SAP provided nucleation sites and enough water for biomineralization in the healing process.</div></div>","PeriodicalId":10660,"journal":{"name":"Composites Part B: Engineering","volume":"287 ","pages":"Article 111872"},"PeriodicalIF":12.7000,"publicationDate":"2024-10-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Composites Part B: Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S135983682400684X","RegionNum":1,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

Expanded polystyrene (EPS) is a low-density material prone to float during composite mixing and vibration. Inspired by this, a two-bacteria-capsule system was reported in this study to enhance the self-healing capacity of cracked mortar. Specifically, the BC-A capsule, containing aerobic bacteria, EPS, and superabsorbent polymer (SAP), and the BC-N capsule, containing anaerobic bacteria and SAP, are prepared through granulation using polyethylene glycol. Sulphoaluminate cement and epoxy resin are used to encapsulate the core materials. The BC-A capsules automatically float in the composite preparation process, while the BC-N capsules are distributed in the middle and bottom regions due to extrusion effect. Upon capsule rupture, the two types of bacteria are released in regions favorable for biomineralization, corresponding to the principle that oxygen concentration reduces along the crack depth. The self-healing behaviour was evaluated as well as the healing products were characterized. The results showed that the capsules cracked simultaneously with the composite and the coating effectively avoided premature release of the self-healing materials. Cementitious composites containing double capsules achieved 90 % closure of cracks with initial widths of 50–600 μm. The three-dimensional healing capacity was significantly enhanced, particularly in terms of impermeability and strength recovery ratio. The main healing products in the cracks were calcite and swollen SAP. The swollen SAP provided nucleation sites and enough water for biomineralization in the healing process.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
包含两种细菌胶囊的裂缝水泥基复合材料自愈合新概念设计
发泡聚苯乙烯(EPS)是一种低密度材料,在复合搅拌和振动过程中容易漂浮。受此启发,本研究报告了一种双细菌胶囊系统,以增强开裂砂浆的自愈能力。具体来说,BC-A 胶囊含有好氧菌、发泡聚苯乙烯(EPS)和超吸水聚合物(SAP),BC-N 胶囊含有厌氧菌和 SAP。硫铝酸盐水泥和环氧树脂用于封装核心材料。BC-A 胶囊在复合材料制备过程中自动上浮,而 BC-N 胶囊则由于挤出效应分布在中间和底部区域。胶囊破裂时,两种细菌会在有利于生物矿化的区域释放出来,这与氧气浓度沿裂缝深度降低的原理是一致的。对自愈合行为进行了评估,并对愈合产物进行了表征。结果表明,胶囊与复合材料同时开裂,涂层有效避免了自愈合材料的过早释放。含有双层胶囊的水泥基复合材料可使初始宽度为 50-600 μm 的裂缝闭合 90%。三维愈合能力显著增强,特别是在抗渗性和强度恢复比方面。裂缝中的主要愈合产物是方解石和膨胀的 SAP。膨胀的 SAP 为愈合过程中的生物矿化提供了成核点和足够的水分。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Composites Part B: Engineering
Composites Part B: Engineering 工程技术-材料科学:复合
CiteScore
24.40
自引率
11.50%
发文量
784
审稿时长
21 days
期刊介绍: Composites Part B: Engineering is a journal that publishes impactful research of high quality on composite materials. This research is supported by fundamental mechanics and materials science and engineering approaches. The targeted research can cover a wide range of length scales, ranging from nano to micro and meso, and even to the full product and structure level. The journal specifically focuses on engineering applications that involve high performance composites. These applications can range from low volume and high cost to high volume and low cost composite development. The main goal of the journal is to provide a platform for the prompt publication of original and high quality research. The emphasis is on design, development, modeling, validation, and manufacturing of engineering details and concepts. The journal welcomes both basic research papers and proposals for review articles. Authors are encouraged to address challenges across various application areas. These areas include, but are not limited to, aerospace, automotive, and other surface transportation. The journal also covers energy-related applications, with a focus on renewable energy. Other application areas include infrastructure, off-shore and maritime projects, health care technology, and recreational products.
期刊最新文献
Spider web-inspired sericin/polyacrylamide composite hydrogel with super-low hysteresis for monitoring penalty of sports competition Engineered dECM-based microsystem promotes cartilage regeneration in osteoarthritis by synergistically enhancing chondrogenesis of BMSCs and anti-inflammatory effect On demand thermal surface modification of carbon fiber for improved interfacial shear strength Personalized customization of in-plane thermal conductive networks by a novel electrospinning method Microchannels-enabled vertical alignment of hexagonal boron nitride in silicone rubber composites to achieve high through-plane thermal conductivity
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1