Eco-friendly fabrication of ZnO-TiO2-rGO nanocomposite for efficient adsorption-assisted organic dyes elimination

IF 2.9 Q1 MATERIALS SCIENCE, CERAMICS Open Ceramics Pub Date : 2024-10-02 DOI:10.1016/j.oceram.2024.100691
Md Elias , Ehsanur Rahman , Sonia Akter , Mohammad Awlad Hossain , Rumana A. Jahan , Md Nizam Uddin , Shakhawat H. Firoz
{"title":"Eco-friendly fabrication of ZnO-TiO2-rGO nanocomposite for efficient adsorption-assisted organic dyes elimination","authors":"Md Elias ,&nbsp;Ehsanur Rahman ,&nbsp;Sonia Akter ,&nbsp;Mohammad Awlad Hossain ,&nbsp;Rumana A. Jahan ,&nbsp;Md Nizam Uddin ,&nbsp;Shakhawat H. Firoz","doi":"10.1016/j.oceram.2024.100691","DOIUrl":null,"url":null,"abstract":"<div><div>The growing interest in combining the photocatalytic properties of semiconductors like ZnO and TiO<sub>2</sub> with the superior electron conduction capabilities of graphene has resulted in the successful synthesis of in-situ reduced graphene oxide (rGO) supported ZnO-TiO<sub>2</sub> nanostructures through a simple microwave-assisted synthesis method. X-ray Diffraction Spectroscopy (XRD), Field Emission Scanning Electron Microscope (FESEM), UV–visible spectroscopy (UV–vis), and Fourier Transform Infrared Spectroscopy (FTIR) were employed to characterize structural, morphological and optical properties as well as surface functional groups of the synthesized products. The XRD measurements of our synthesized samples confirm both structural crystallinity and phase purity, while the FTIR analysis verifies the complete reduction of graphene oxide (GO) to reduced graphene oxide (rGO). The synthesized ternary nanocomposite ZnO-TiO<sub>2</sub>-rGO exhibited a remarkable 100 % adsorption-assisted removal efficiency for 20 mg/L methylene blue (MB) dye under ultraviolet light illumination within 120 min, along with a 56 % dye adsorption removal efficiency in the same time interval. In comparison, pure ZnO showed 0 % adsorption and only 31 % photocatalytic efficiency at the similar condition. Remarkably, the ZnO-TiO<sub>2</sub>-rGO nanocomposite exhibited exceptional photocatalytic activity mediated by adsorption, achieving complete degradation of MB dye within 5 min under sunlight irradiation. The photocatalytic efficiency and dye adsorption capacity were found to be significantly lower for the anionic dye methyl orange (MO) compared to the cationic MB dye. The study thoroughly investigated the influence of catalyst dose and initial dye concentration on photodegradation. The proposed mechanism indicates that the extensive surface area and numerous active sites on the rGO promote adsorption, which is then followed by degradation through the metal oxides. Overall, the results unveil that the microwave-assisted synthesis of ZnO-TiO<sub>2</sub>-rGO nanocomposite is a promising and environmentally friendly approach for efficiently degrading dyes from contaminated wastewater using both UV light and natural sunlight irradiation.</div></div>","PeriodicalId":34140,"journal":{"name":"Open Ceramics","volume":null,"pages":null},"PeriodicalIF":2.9000,"publicationDate":"2024-10-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Open Ceramics","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S266653952400155X","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0

Abstract

The growing interest in combining the photocatalytic properties of semiconductors like ZnO and TiO2 with the superior electron conduction capabilities of graphene has resulted in the successful synthesis of in-situ reduced graphene oxide (rGO) supported ZnO-TiO2 nanostructures through a simple microwave-assisted synthesis method. X-ray Diffraction Spectroscopy (XRD), Field Emission Scanning Electron Microscope (FESEM), UV–visible spectroscopy (UV–vis), and Fourier Transform Infrared Spectroscopy (FTIR) were employed to characterize structural, morphological and optical properties as well as surface functional groups of the synthesized products. The XRD measurements of our synthesized samples confirm both structural crystallinity and phase purity, while the FTIR analysis verifies the complete reduction of graphene oxide (GO) to reduced graphene oxide (rGO). The synthesized ternary nanocomposite ZnO-TiO2-rGO exhibited a remarkable 100 % adsorption-assisted removal efficiency for 20 mg/L methylene blue (MB) dye under ultraviolet light illumination within 120 min, along with a 56 % dye adsorption removal efficiency in the same time interval. In comparison, pure ZnO showed 0 % adsorption and only 31 % photocatalytic efficiency at the similar condition. Remarkably, the ZnO-TiO2-rGO nanocomposite exhibited exceptional photocatalytic activity mediated by adsorption, achieving complete degradation of MB dye within 5 min under sunlight irradiation. The photocatalytic efficiency and dye adsorption capacity were found to be significantly lower for the anionic dye methyl orange (MO) compared to the cationic MB dye. The study thoroughly investigated the influence of catalyst dose and initial dye concentration on photodegradation. The proposed mechanism indicates that the extensive surface area and numerous active sites on the rGO promote adsorption, which is then followed by degradation through the metal oxides. Overall, the results unveil that the microwave-assisted synthesis of ZnO-TiO2-rGO nanocomposite is a promising and environmentally friendly approach for efficiently degrading dyes from contaminated wastewater using both UV light and natural sunlight irradiation.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
以环保方式制备 ZnO-TiO2-rGO 纳米复合材料,用于高效吸附辅助去除有机染料
人们对将氧化锌和二氧化钛等半导体的光催化特性与石墨烯的卓越电子传导能力相结合的兴趣与日俱增,因此通过一种简单的微波辅助合成方法,成功合成了原位还原氧化石墨烯(rGO)支撑的氧化锌-二氧化钛纳米结构。我们采用了 X 射线衍射光谱(XRD)、场发射扫描电子显微镜(FESEM)、紫外可见光谱(UV-vis)和傅立叶变换红外光谱(FTIR)来表征合成产物的结构、形态和光学性质以及表面官能团。对合成样品的 XRD 测量证实了其结构结晶性和相纯度,而傅立叶变换红外光谱分析则验证了氧化石墨烯(GO)完全还原为还原型氧化石墨烯(rGO)。合成的三元纳米复合材料 ZnO-TiO2-rGO 在紫外光照射下,120 分钟内对 20 mg/L 亚甲基蓝(MB)染料的吸附去除率达到 100%,在相同时间间隔内对染料的吸附去除率达到 56%。相比之下,纯氧化锌在类似条件下的吸附率为 0%,光催化效率仅为 31%。值得注意的是,ZnO-TiO2-rGO 纳米复合材料在吸附作用的介导下表现出优异的光催化活性,在阳光照射下 5 分钟内就能完全降解 MB 染料。研究发现,与阳离子甲基橙(MO)相比,阴离子甲基橙(MO)的光催化效率和染料吸附能力明显较低。研究深入探讨了催化剂剂量和初始染料浓度对光降解的影响。提出的机理表明,rGO 上广泛的表面积和众多的活性位点促进了吸附,然后通过金属氧化物进行降解。总之,研究结果表明,微波辅助合成 ZnO-TiO2-rGO 纳米复合材料是一种利用紫外线和自然光照射高效降解受污染废水中染料的有前途的环保方法。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Open Ceramics
Open Ceramics Materials Science-Materials Chemistry
CiteScore
4.20
自引率
0.00%
发文量
102
审稿时长
67 days
期刊最新文献
Microstructures, phase and mechanical characterisation of Al2O3-ZrO2-TiO2 coating produced by atmospheric plasma spraying Tri-axial magnetic alignment and magnetic anisotropies in misfit-layered calcium-based cobaltites doped with rare-earth ions Specifics of Al substitution into boron carbide: A DFT study Thermal properties of MB2-WC (M = Ti, Zr, Hf) and tungsten and their stability after deuterium plasma exposure Yttria-stabilised zirconia and lanthanum cerate granules with YSZ whiskers prepared by spray drying for thermal barrier coatings
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1