Mechanisms of deformation, damage and life behavior of inconel 617 alloy during creep-fatigue interaction at 700 °C

IF 5.7 2区材料科学 Q1 ENGINEERING, MECHANICAL International Journal of Fatigue Pub Date : 2024-10-03 DOI:10.1016/j.ijfatigue.2024.108635

Qingtong Wang , Jingtai Yu , Bingbing Li , Yuguang Li , Kang Wang , Xu Chen

引用次数: 0

Abstract

The continuous fatigue tests and creep-fatigue tests with the imposition of strain hold at the peak strain were conducted at 700 °C on Inconel 617 alloy. The strain amplitude of 0.25 %, 0.30 %, 0.35 %, 0.40 %, and hold time of 60 s, 600 s and 1800 s were used. The cyclic deformation behavior and dynamic strain aging (DSA) were discussed. The strain localization, dislocation substructure and precipitation behavior were carefully characterized, which provided physical information to understand the cyclic deformation behavior. The dominant damage mechanism and damage interaction, responsible for the cracking behavior were identified based on the fracture surface observation and secondary cracks morphology. The cyclic life saturation effect was comprehensively elucidated from the perspective of macroscopic mechanical response and microscopic deformation mechanism.

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

inconel 617 合金在 700 °C 蠕变-疲劳相互作用过程中的变形、损伤和寿命行为机理

在 700 °C 下对 Inconel 617 合金进行了连续疲劳试验和在峰值应变处施加应变保持的蠕变疲劳试验。应变振幅分别为 0.25%、0.30%、0.35% 和 0.40%，保持时间分别为 60 秒、600 秒和 1800 秒。讨论了循环变形行为和动态应变时效（DSA）。对应变定位、位错亚结构和析出行为进行了细致的表征，为理解循环变形行为提供了物理信息。根据断裂面观察和次生裂纹形态，确定了导致开裂行为的主要损伤机制和损伤相互作用。从宏观力学响应和微观变形机理的角度全面阐明了循环寿命饱和效应。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文去求助

来源期刊

International Journal of Fatigue 工程技术-材料科学：综合

CiteScore

10.70

自引率

21.70%

发文量

619

审稿时长

58 days

期刊介绍： Typical subjects discussed in International Journal of Fatigue address: Novel fatigue testing and characterization methods (new kinds of fatigue tests, critical evaluation of existing methods, in situ measurement of fatigue degradation, non-contact field measurements) Multiaxial fatigue and complex loading effects of materials and structures, exploring state-of-the-art concepts in degradation under cyclic loading Fatigue in the very high cycle regime, including failure mode transitions from surface to subsurface, effects of surface treatment, processing, and loading conditions Modeling (including degradation processes and related driving forces, multiscale/multi-resolution methods, computational hierarchical and concurrent methods for coupled component and material responses, novel methods for notch root analysis, fracture mechanics, damage mechanics, crack growth kinetics, life prediction and durability, and prediction of stochastic fatigue behavior reflecting microstructure and service conditions) Models for early stages of fatigue crack formation and growth that explicitly consider microstructure and relevant materials science aspects Understanding the influence or manufacturing and processing route on fatigue degradation, and embedding this understanding in more predictive schemes for mitigation and design against fatigue Prognosis and damage state awareness (including sensors, monitoring, methodology, interactive control, accelerated methods, data interpretation) Applications of technologies associated with fatigue and their implications for structural integrity and reliability. This includes issues related to design, operation and maintenance, i.e., life cycle engineering Smart materials and structures that can sense and mitigate fatigue degradation Fatigue of devices and structures at small scales, including effects of process route and surfaces/interfaces.