Preparation and properties of ultra-high hardness Co-Cr-Mo-Nb-B high-temperature amorphous alloy coating

IF 5.3 2区材料科学 Q1 MATERIALS SCIENCE, COATINGS & FILMS Surface & Coatings Technology Pub Date : 2024-10-15 DOI:10.1016/j.surfcoat.2024.131474

引用次数: 0

Abstract

In this paper, a high temperature and amorphous alloy coating of Co₂₆Cr₂₆Mo₂₆Nb₇B₁₅ was prepared by high-velocity oxy-fuel spraying. The phase structure, thermodynamic properties, hardness, friction and wear behaviors, and corrosion behavior and its mechanism were studied. The results showed that the glass transition temperature of the coating reached to 1058 K, and the hardness was as high as 1589.4 HV. The amorphous alloy coating of Co₂₆Cr₂₆Mo₂₆Nb₇B₁₅ exhibited excellent wear resistance. Its friction coefficient was only 0.1152, which was about 25 % of 316 stainless steel, and the wear volume was only 0.1338 mm³. Additionally, the coating presented excellent corrosion resistance in 1 M hydrochloric acid solution, with the corrosion current density of 1.04 × 10⁻⁵ A·cm⁻², and corrosion voltage of −0.32 V vs SCE.

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

超高硬度 Co-Cr-Mo-Nb-B 高温非晶合金涂层的制备与性能

本文采用高速纯氧喷涂技术制备了 Co26Cr26Mo26Nb7B15 高温非晶合金涂层。研究了涂层的相结构、热力学性质、硬度、摩擦磨损行为、腐蚀行为及其机理。结果表明，涂层的玻璃化转变温度达到 1058 K，硬度高达 1589.4 HV。Co26Cr26Mo26Nb7B15 非晶合金涂层具有优异的耐磨性。其摩擦系数仅为 0.1152，约为 316 不锈钢的 25%，磨损体积仅为 0.1338 立方毫米。此外，该涂层在 1 M 盐酸溶液中具有优异的耐腐蚀性，腐蚀电流密度为 1.04 × 10-5 A-cm-2，腐蚀电压为 -0.32 V vs SCE。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文去求助

来源期刊

Surface & Coatings Technology 工程技术-材料科学：膜

CiteScore

10.00

自引率

11.10%

发文量

921

审稿时长

19 days

期刊介绍： Surface and Coatings Technology is an international archival journal publishing scientific papers on significant developments in surface and interface engineering to modify and improve the surface properties of materials for protection in demanding contact conditions or aggressive environments, or for enhanced functional performance. Contributions range from original scientific articles concerned with fundamental and applied aspects of research or direct applications of metallic, inorganic, organic and composite coatings, to invited reviews of current technology in specific areas. Papers submitted to this journal are expected to be in line with the following aspects in processes, and properties/performance: A. Processes: Physical and chemical vapour deposition techniques, thermal and plasma spraying, surface modification by directed energy techniques such as ion, electron and laser beams, thermo-chemical treatment, wet chemical and electrochemical processes such as plating, sol-gel coating, anodization, plasma electrolytic oxidation, etc., but excluding painting. B. Properties/performance: friction performance, wear resistance (e.g., abrasion, erosion, fretting, etc), corrosion and oxidation resistance, thermal protection, diffusion resistance, hydrophilicity/hydrophobicity, and properties relevant to smart materials behaviour and enhanced multifunctional performance for environmental, energy and medical applications, but excluding device aspects.