Fabricating crowns that fit both an implant and an existing removable partial denture.

IF 4.3 2区 医学 Q1 DENTISTRY, ORAL SURGERY & MEDICINE Journal of Prosthetic Dentistry Pub Date : 2024-10-23 DOI:10.1016/j.prosdent.2024.09.024
Saud S Alajmi, Charles J Goodacre
{"title":"Fabricating crowns that fit both an implant and an existing removable partial denture.","authors":"Saud S Alajmi, Charles J Goodacre","doi":"10.1016/j.prosdent.2024.09.024","DOIUrl":null,"url":null,"abstract":"<p><p>Fabricating a crown to fit both a tooth and an existing removable partial denture (RPD) using many different techniques has been described. However, in the event of abutment loss, information regarding the clinical and laboratory steps used to fabricate a crown that fits both an implant and an RPD is lacking. This report describes the use of either an impression coping or an interim abutment attached to the implant to which a composite resin interim restoration material is flowed and the RPD then seated to form a resin pattern of the required crown form. The process allows the implant crown to be made without retaining the patient's RPD during crown fabrication.</p>","PeriodicalId":16866,"journal":{"name":"Journal of Prosthetic Dentistry","volume":null,"pages":null},"PeriodicalIF":4.3000,"publicationDate":"2024-10-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Prosthetic Dentistry","FirstCategoryId":"3","ListUrlMain":"https://doi.org/10.1016/j.prosdent.2024.09.024","RegionNum":2,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"DENTISTRY, ORAL SURGERY & MEDICINE","Score":null,"Total":0}
引用次数: 0

Abstract

Fabricating a crown to fit both a tooth and an existing removable partial denture (RPD) using many different techniques has been described. However, in the event of abutment loss, information regarding the clinical and laboratory steps used to fabricate a crown that fits both an implant and an RPD is lacking. This report describes the use of either an impression coping or an interim abutment attached to the implant to which a composite resin interim restoration material is flowed and the RPD then seated to form a resin pattern of the required crown form. The process allows the implant crown to be made without retaining the patient's RPD during crown fabrication.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
制作适合种植体和现有可摘局部义齿的牙冠。
使用许多不同的技术制作牙冠,使其同时适合牙齿和现有的可摘局部义齿(RPD)的情况已经有所描述。但是,在基台缺失的情况下,还缺乏有关制作同时适合种植体和可摘局部义齿的牙冠的临床和实验室步骤的信息。本报告介绍了使用印模基台或临时基台与种植体连接的方法,在印模基台或临时基台上注入复合树脂临时修复材料,然后将 RPD 就位,形成所需冠型的树脂模式。该工艺可以在不保留患者 RPD 的情况下制作种植牙冠。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Prosthetic Dentistry
Journal of Prosthetic Dentistry 医学-牙科与口腔外科
CiteScore
7.00
自引率
13.00%
发文量
599
审稿时长
69 days
期刊介绍: The Journal of Prosthetic Dentistry is the leading professional journal devoted exclusively to prosthetic and restorative dentistry. The Journal is the official publication for 24 leading U.S. international prosthodontic organizations. The monthly publication features timely, original peer-reviewed articles on the newest techniques, dental materials, and research findings. The Journal serves prosthodontists and dentists in advanced practice, and features color photos that illustrate many step-by-step procedures. The Journal of Prosthetic Dentistry is included in Index Medicus and CINAHL.
期刊最新文献
Effect of machining method and margin design on the accuracy and margin quality of monolithic zirconia crowns. A digital workflow for recording implant positions and jaw relation for implant-supported complete arch prostheses. Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry. Prosthodontic rehabilitation of a patient after mucormycosis using a digitally fabricated hollow complete denture with 3D printed intramucosal inserts. Unconventional digital dentures: Overcoming software challenges and integrating digital workflows into conventional techniques.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1