Influence of Synthesis Parameters on Structure and Characteristics of the Graphene Grown Using PECVD on Sapphire Substrate.

Abstract

The high surface area and transfer-less growth of graphene on dielectric materials is still a challenge in the production of novel sensing devices. We demonstrate a novel approach to graphene synthesis on a C-plane sapphire substrate, involving the microwave plasma-enhanced chemical vapor deposition (MW-PECVD) technique. The decomposition of methane, which is used as a precursor gas, is achieved without the need for remote plasma. Raman spectroscopy, atomic force microscopy and resistance characteristic measurements were performed to investigate the potential of graphene for use in sensing applications. We show that the thickness and quality of graphene film greatly depend on the CH₄/H₂ flow ratio, as well as on chamber pressure during the synthesis. By varying these parameters, the intensity ratio of Raman D and G bands of graphene varied between ~1 and ~4, while the 2D to G band intensity ratio was found to be 0.05-0.5. Boundary defects are the most prominent defect type in PECVD graphene, giving it a grainy texture. Despite this, the samples exhibited sheet resistance values as low as 1.87 kΩ/□. This reveals great potential for PECVD methods and could contribute toward efficient and straightforward graphene growth on various substrates.