Appraisal and simulation of 125I production yield with Low/Medium energy proton and deuteron particles on tellurium targets

IF 2.5 Q2 CHEMISTRY, MULTIDISCIPLINARY Results in Chemistry Pub Date : 2024-10-16 DOI:10.1016/j.rechem.2024.101865
Abdollah Khorshidi
{"title":"Appraisal and simulation of 125I production yield with Low/Medium energy proton and deuteron particles on tellurium targets","authors":"Abdollah Khorshidi","doi":"10.1016/j.rechem.2024.101865","DOIUrl":null,"url":null,"abstract":"<div><h3>Background</h3><div>The radioisotope iodine-125 has been proposed for use in brachytherapy in nuclear medicine. Currently, <sup>125</sup>I is mainly produced by neutron irradiation of xenon gas in nuclear reactors, although cyclotron-based production can also be investigated.</div></div><div><h3>Methods</h3><div>In this research, the cyclotron in Karaj with deuteron energy of 20 MeV and proton energy of 30 MeV was considered to simulate the production of <sup>125</sup>I using <sup>124/125</sup>Te targets. Here, the <sup>125</sup>Te(p,n)<sup>125</sup>I and <sup>124</sup>Te(d,n)<sup>125</sup>I reactions cross sections were analyzed via TALYS code in optical potential model by changing diffusivity and radius, level density model, density of exciton model constituents, pre-equilibrium and equilibrium model by Hauser-Feshbach formalism, branching rates, and possibility of derived particle generation. Additionally, the cross section of <sup>126</sup>Te(p,2n)<sup>125</sup>I reaction was evaluated besides the cross sections of competing reactions. The production yields of the two types of interactions were calculated at different incident particles energies.</div></div><div><h3>Results</h3><div>The maximum cross-section data for <sup>125</sup>I production via (p,n) reaction was estimated to be 684 mb at 11 MeV and for the (d,n) reaction to be 233 mb at 9 MeV. These reactions gave the <sup>125</sup>I production yield of 1.22 and 0.188 MBq/µA.h at these energies, respectively. The calculated cross-sections data for both incident particles energies were plotted and compared with other reports. In curve fitting, the least-square Pade approximation was used with distinct parameters on designated points with χ2 of 0.98 and 0.87 for (d,n) and (p,n) reactions, correspondingly. The maximum uncertainty was estimated to be 6.5 % for 12 MeV deuterons and 12.9 % for 9 MeV protons.</div></div><div><h3>Conclusion</h3><div>The combination of <sup>125</sup>I with other therapeutic radionuclides such as gold and terbium may improve the chances of treatment by increasing the rate of cancer cell killing. Remarkably, the integration of therapy and diagnosis can represent a significant advance in tailored cancer treatment.</div></div>","PeriodicalId":420,"journal":{"name":"Results in Chemistry","volume":"12 ","pages":"Article 101865"},"PeriodicalIF":2.5000,"publicationDate":"2024-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Results in Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2211715624005617","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

Background

The radioisotope iodine-125 has been proposed for use in brachytherapy in nuclear medicine. Currently, 125I is mainly produced by neutron irradiation of xenon gas in nuclear reactors, although cyclotron-based production can also be investigated.

Methods

In this research, the cyclotron in Karaj with deuteron energy of 20 MeV and proton energy of 30 MeV was considered to simulate the production of 125I using 124/125Te targets. Here, the 125Te(p,n)125I and 124Te(d,n)125I reactions cross sections were analyzed via TALYS code in optical potential model by changing diffusivity and radius, level density model, density of exciton model constituents, pre-equilibrium and equilibrium model by Hauser-Feshbach formalism, branching rates, and possibility of derived particle generation. Additionally, the cross section of 126Te(p,2n)125I reaction was evaluated besides the cross sections of competing reactions. The production yields of the two types of interactions were calculated at different incident particles energies.

Results

The maximum cross-section data for 125I production via (p,n) reaction was estimated to be 684 mb at 11 MeV and for the (d,n) reaction to be 233 mb at 9 MeV. These reactions gave the 125I production yield of 1.22 and 0.188 MBq/µA.h at these energies, respectively. The calculated cross-sections data for both incident particles energies were plotted and compared with other reports. In curve fitting, the least-square Pade approximation was used with distinct parameters on designated points with χ2 of 0.98 and 0.87 for (d,n) and (p,n) reactions, correspondingly. The maximum uncertainty was estimated to be 6.5 % for 12 MeV deuterons and 12.9 % for 9 MeV protons.

Conclusion

The combination of 125I with other therapeutic radionuclides such as gold and terbium may improve the chances of treatment by increasing the rate of cancer cell killing. Remarkably, the integration of therapy and diagnosis can represent a significant advance in tailored cancer treatment.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
评估和模拟在碲靶上利用低/中能质子和氘核粒子产生 125I 的产率
背景放射性同位素碘 125 已被提议用于核医学近距离放射治疗。目前,125I 主要是在核反应堆中通过中子辐照氙气产生的,但也可以研究基于回旋加速器的生产。方法在这项研究中,考虑使用卡拉杰的回旋加速器(氘核能量为 20 MeV,质子能量为 30 MeV)来模拟使用 124/125Te 靶件生产 125I。在这里,通过改变扩散率和半径、水平密度模型、激子模型成分密度、豪瑟-费什巴赫形式主义的预平衡和平衡模型、支化率以及衍生粒子生成的可能性,在光势能模型下通过 TALYS 代码分析了 125Te(p,n)125I 和 124Te(d,n)125I 反应的截面。此外,除了竞争反应的截面之外,还评估了 126Te(p,2n)125I 反应的截面。结果通过(p,n)反应产生 125I 的最大截面数据在 11 MeV 时估计为 684 mb,通过(d,n)反应产生 125I 的最大截面数据在 9 MeV 时估计为 233 mb。这些反应在这些能量下产生的 125I 产量分别为 1.22 和 0.188 MBq/µA.h。我们绘制了两种入射粒子能量下的计算截面数据,并与其他报告进行了比较。在曲线拟合中,使用了最小平方帕德近似法,指定点的参数不同,(d,n) 和 (p,n) 反应的 χ2 分别为 0.98 和 0.87。12 MeV 氘核的最大不确定性估计为 6.5%,9 MeV 质子的最大不确定性估计为 12.9%。值得注意的是,将治疗和诊断结合在一起可代表量身定制的癌症治疗的一大进步。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Results in Chemistry
Results in Chemistry Chemistry-Chemistry (all)
CiteScore
2.70
自引率
8.70%
发文量
380
审稿时长
56 days
期刊最新文献
Synthesis of prodelphinidin B2 3,3′′-digallate using AgOTf-mediated self-condensation Synthesis, crystal structure, cytotoxicity (MCF-7 and HeLa) and free radical scavenging activity of the hydrazones derived from 2-methylsulfonyl-5-nitrobenzaldehyde Anti-corrosive efficiency of salvadora persica plant stick powder on SS 316L orthodontic wire in artificial saliva Analysis of research fields involving wastewater-based epidemiology and interdisciplinary spillovers using a structural topic model PD-1 agonist: A novel therapeutic approach to resolve atherosclerosis
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1