Effects of axial launch spacing on cavitation interference and load characteristics during underwater salvo

Abstract

This paper analyzes the effect of launch interval on cavitation flow interference and load characteristics during underwater salvo. The study employs the Improved Delayed Detached Eddy Simulation and the Schnerr-Sauer cavitation model, Volume of Fluid (VOF) multiphase flow model, and overlapping grid. Additionally, decompression experiment systems are designed, and numerical simulations are found to be in good agreement with experimental results, thus verifying the effectiveness of the simulation. Detailed discussions are provided on multiphase flow field and load distribution. The results reveal a top-down collapse process of the cavity, with collapse shrinking to an isolated bubble at the end. Synchronized collapse pressure is characterized by short pulse widths at the peaks, all located at the lowermost part of the cavity. During the underwater stage, when the axial launch spacing ranges between 0.5 times and 1.0 times the length of the projectile, the head of the second projectile acts on the area below the center of mass of the first. This leads to gradual stabilization of the initial cavity and a decrease in deviation of the center of mass toward the inside. Despite experiencing large-scale fracture and detachment due to interference from the wake of the first engine, the motion stability of the inside cavity of the second projectile remains intact. In the water exit stage, when the axial launch spacing ranges between 0.75 times and 1 time the length of the projectile, it causes expansion and contraction of the inside cavity of the second projectile. However, asymmetric synchronous collapse loads may occur, leading to unstable motion posture.