Optimizing tensile strength and failure prediction in hemp fiber composites: Coupling effects of microfibril angle and fiber orientation under off-axis loading

Abstract

In response to environmental concerns associated with synthetic fiber-reinforced materials, plant fiber-reinforced composites are increasingly recognized as a more sustainable alternative. However, predicting the mechanical properties of these composites remains challenging due to the unique microstructure of plant fibers. This study proposes an optimized Tsai-Hill failure criterion that incorporates the microfibril angle (MFA) and fiber orientation to enhance failure predictions. The MFA of hemp fibers was measured using X-ray diffraction (XRD), and the failure mechanisms of unidirectional hemp fiber composites under off-axis tensile stresses were thoroughly analyzed. Experimental results reveal a 10.69 % increase in tensile strength at a 5° off-axis angle compared to the fiber direction. As the off-axis angle increases, the failure mode transitions from fiber fracture and pull-out to matrix tearing and interlayer shear failure. For angles above 10°, the failure stress aligns with both the maximum stress and Tsai-Hill criteria. For angles below 10°, integrating MFA into the Tsai-Hill criterion significantly improves prediction accuracy. These findings offer critical insights for optimizing the tensile performance of hemp fiber composites and predicting their behavior under off-axis loading conditions. Consequently, this study can support the use of hemp fiber composites in a broader range of applications.