Study on corrosion behavior and first-principle analysis of M50 steel in lubricating oil contaminated by salt water

Abstract

The corrosive wear of M50 steel in lubricating oil contaminated with saline is a form of wear that often occurs within the main shaft bearings of aviation engines carried by aircraft working at sea. In the present paper, the corrosion behavior of M50 steel in lubricating oil contaminated with saline was studied. The open-circuit potential, polarization curve and impedance spectrum were analyzed by rotating electrochemical corrosion wear test. A three-layer interface microscopic molecular model was established with Materials Studio to simulate the dynamic corrosion evolution process of M50 steel self-matching pairs and the adsorption energy was calculated. The results show that the corrosion type is pitting corrosion. With the increase of saline concentration, the corrosion area becomes wider and shallower, and the size of the pitting core gradually decreases. The weight loss of M50 steel increases over time, but the trend slows down, which is also shown in the MS simulation results. Electrochemical tests show that the tribocorrosion of M50 steel is related to load, speed. As the load increases, the corrosion rate decreases. And, as the speed increases, the corrosion rate increases. This has practical significance for extending the understanding of tribocorrosion of M50 steel in marine atmospheric environments.