Influence of hot rolling on microstructure, mechanical properties, and martensitic transformation of TiNiCuNb shape memory alloy

IF 3.8 2区材料科学 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY Vacuum Pub Date : 2024-10-18 DOI:10.1016/j.vacuum.2024.113751

Jessica D. Silva , Dilson S. Santos , Vicente T.L. Buono , Leandro A. Santos

引用次数: 0

Abstract

TiNiCuNb shape memory alloys are a promising new class of materials with the potential to be applied as elastocaloric components. However, the mechanical processing of these alloys remains a challenge and new insights on this topic must enlighten the knowledge about this system. In this work, the effects of hot rolling on Ti₄₆Ni₃₈Cu₁₀Nb₆ alloy were investigated. The results showed that hot rolling leads to the increase of martensitic transformation temperatures and the formation of a matrix containing both B2 and B19 phases. The coarsening of the lamellar eutectic constituent was observed, and part of the β-Nb phase precipitated into the matrix after being dissolved due to hot work. Microstructural aspects and ultra-microhardness measurements suggest that dynamic recrystallization occurred during hot rolling.

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

热轧对 TiNiCuNb 形状记忆合金微观结构、机械性能和马氏体转变的影响

钛镍铜铌形状记忆合金是一类前景广阔的新型材料，有望用作弹性部件。然而，这些合金的机械加工仍然是一个挑战，对这一主题的新见解必须启迪人们对这一系统的认识。在这项工作中，研究了热轧对 Ti46Ni38Cu10Nb6 合金的影响。结果表明，热轧导致马氏体转变温度升高，并形成含有 B2 和 B19 相的基体。观察到片状共晶成分变粗，部分 β-Nb 相在热加工溶解后析出到基体中。微观结构和超显微硬度测量结果表明，热轧过程中发生了动态再结晶。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文去求助

来源期刊

Vacuum 工程技术-材料科学：综合

CiteScore

6.80

自引率

17.50%

发文量

审稿时长

34 days

期刊介绍： Vacuum is an international rapid publications journal with a focus on short communication. All papers are peer-reviewed, with the review process for short communication geared towards very fast turnaround times. The journal also published full research papers, thematic issues and selected papers from leading conferences. A report in Vacuum should represent a major advance in an area that involves a controlled environment at pressures of one atmosphere or below. The scope of the journal includes: 1. Vacuum; original developments in vacuum pumping and instrumentation, vacuum measurement, vacuum gas dynamics, gas-surface interactions, surface treatment for UHV applications and low outgassing, vacuum melting, sintering, and vacuum metrology. Technology and solutions for large-scale facilities (e.g., particle accelerators and fusion devices). New instrumentation ( e.g., detectors and electron microscopes). 2. Plasma science; advances in PVD, CVD, plasma-assisted CVD, ion sources, deposition processes and analysis. 3. Surface science; surface engineering, surface chemistry, surface analysis, crystal growth, ion-surface interactions and etching, nanometer-scale processing, surface modification. 4. Materials science; novel functional or structural materials. Metals, ceramics, and polymers. Experiments, simulations, and modelling for understanding structure-property relationships. Thin films and coatings. Nanostructures and ion implantation.