Effect of layer thickness on the thermoelectric properties of fully sprayed poly(3-hexylthiophene-2,5-diyl) thin films doped with chloroauric acid

IF 2.3 4区 材料科学 Q2 CHEMISTRY, APPLIED Journal of Coatings Technology and Research Pub Date : 2024-10-14 DOI:10.1007/s11998-024-01008-0
Benedikt Sochor, Simon Schraad, Linus F. Huber, Alexander Hexemer, Tim Laarmann, Sarathlal Koyiloth Vayalil, Peter Müller-Buschbaum, Stephan V. Roth
{"title":"Effect of layer thickness on the thermoelectric properties of fully sprayed poly(3-hexylthiophene-2,5-diyl) thin films doped with chloroauric acid","authors":"Benedikt Sochor,&nbsp;Simon Schraad,&nbsp;Linus F. Huber,&nbsp;Alexander Hexemer,&nbsp;Tim Laarmann,&nbsp;Sarathlal Koyiloth Vayalil,&nbsp;Peter Müller-Buschbaum,&nbsp;Stephan V. Roth","doi":"10.1007/s11998-024-01008-0","DOIUrl":null,"url":null,"abstract":"<div><p>The thermoelectric properties of fully sprayed thin films of poly(3-hexylthiophen-2,5-diyl) (P3HT) doped with chloroauric acid are investigated for different film thicknesses. The film thickness increases logarithmically with increasing amount of deposited material on the surfaces. Both the electrical conductivity and measured Seebeck coefficients of the doped thin films show an optimal polymer layer thickness between 275 and 310 nm and yield a maximum power factor of <span>\\((1.77\\,\\pm \\,0.22) \\frac{\\mu \\text {W}}{\\text {m}\\cdot \\text {K}^2}\\)</span>. The optimum layer thickness results from the optimal amount of dopant molecules per monomer between 1.1 and 1.3 at these ratios of P3HT and HAuCl<span>\\(_4\\)</span> for the thin film fabrication.</p></div>","PeriodicalId":619,"journal":{"name":"Journal of Coatings Technology and Research","volume":null,"pages":null},"PeriodicalIF":2.3000,"publicationDate":"2024-10-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11998-024-01008-0.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Coatings Technology and Research","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11998-024-01008-0","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, APPLIED","Score":null,"Total":0}
引用次数: 0

Abstract

The thermoelectric properties of fully sprayed thin films of poly(3-hexylthiophen-2,5-diyl) (P3HT) doped with chloroauric acid are investigated for different film thicknesses. The film thickness increases logarithmically with increasing amount of deposited material on the surfaces. Both the electrical conductivity and measured Seebeck coefficients of the doped thin films show an optimal polymer layer thickness between 275 and 310 nm and yield a maximum power factor of \((1.77\,\pm \,0.22) \frac{\mu \text {W}}{\text {m}\cdot \text {K}^2}\). The optimum layer thickness results from the optimal amount of dopant molecules per monomer between 1.1 and 1.3 at these ratios of P3HT and HAuCl\(_4\) for the thin film fabrication.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
层厚度对掺杂氯金酸的全喷涂聚(3-己基噻吩-2,5-二基)薄膜热电性能的影响
研究了掺杂了氯金酸的聚(3-己基噻吩-2,5-二基)(P3HT)全喷涂薄膜在不同薄膜厚度下的热电特性。薄膜厚度随表面沉积材料量的增加而呈对数增加。掺杂薄膜的电导率和测得的塞贝克系数都显示出聚合物层的最佳厚度在 275 到 310 nm 之间,并且产生的最大功率因数为((1.77\\pm \,0.22)\frac\{mu \text {W}}{text {m}\cdot \text {K}^2}})。在 P3HT 和 HAuCl\(_4\) 的这些比率下,每个单体的掺杂剂分子的最佳数量在 1.1 和 1.3 之间,这就是薄膜制造的最佳层厚度。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Coatings Technology and Research
Journal of Coatings Technology and Research 工程技术-材料科学:膜
CiteScore
4.30
自引率
8.70%
发文量
130
审稿时长
2.5 months
期刊介绍: Journal of Coatings Technology and Research (JCTR) is a forum for the exchange of research, experience, knowledge and ideas among those with a professional interest in the science, technology and manufacture of functional, protective and decorative coatings including paints, inks and related coatings and their raw materials, and similar topics.
期刊最新文献
Effect of layer thickness on the thermoelectric properties of fully sprayed poly(3-hexylthiophene-2,5-diyl) thin films doped with chloroauric acid Effects of mica modification with silane on the interface and corrosion resistance of ultraviolet curable epoxy acrylate/mica composite coatings Flame-retardant waterborne polyurethane based on the synergistic effect of HGB and DOPO derivatives Preparation and performance study of GLC/TMP double crosslinking modified waterborne polyurethane for wood coatings A review of thermochromic materials for coating applications: production, protection, and degradation of organic thermochromic materials
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1