A dimensionless model for smoke backflow length prediction with mobile ventilation in tunnel fire

IF 5.1 3区 工程技术 Q2 ENERGY & FUELS Thermal Science and Engineering Progress Pub Date : 2024-11-02 DOI:10.1016/j.tsep.2024.103026
Yanming Ding , Jiaoxin Mei , Xiang Li , Kaihua Lu , Changhai Li
{"title":"A dimensionless model for smoke backflow length prediction with mobile ventilation in tunnel fire","authors":"Yanming Ding ,&nbsp;Jiaoxin Mei ,&nbsp;Xiang Li ,&nbsp;Kaihua Lu ,&nbsp;Changhai Li","doi":"10.1016/j.tsep.2024.103026","DOIUrl":null,"url":null,"abstract":"<div><div>The smoke in tunnel fire is the main factor that causes casualties. Mobile ventilation technology can effectively control smoke and improve ventilation conditions inside the tunnel through mobile fans, especially emergency rescue. Smoke backflow is an important feature of tunnel fires and the smoke backflow length is used as the evaluation index of the smoke control effect. In this paper, a prediction model of smoke backflow length is studied under mobile ventilation unit (MVU) in tunnel fires. The dimensional analysis method is adopted to deduce the expressions of smoke backflow length. Based on the numerical simulation validated by the experiments, the effects of MVU location, fan flow and fire source heat release rate on backflow length are investigated, respectively. Furthermore, artificial neural network is used for data augmentation to obtain the smoke backflow length in a wider range of data. Eventually, the optimal location for mobile fan is established, and a new dimensionless prediction model of smoke backflow length with MVU is proposed. This model is helpful to provide guidance for smoke control in tunnel fire during emergency rescue.</div></div>","PeriodicalId":23062,"journal":{"name":"Thermal Science and Engineering Progress","volume":"56 ","pages":"Article 103026"},"PeriodicalIF":5.1000,"publicationDate":"2024-11-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Thermal Science and Engineering Progress","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2451904924006449","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
引用次数: 0

Abstract

The smoke in tunnel fire is the main factor that causes casualties. Mobile ventilation technology can effectively control smoke and improve ventilation conditions inside the tunnel through mobile fans, especially emergency rescue. Smoke backflow is an important feature of tunnel fires and the smoke backflow length is used as the evaluation index of the smoke control effect. In this paper, a prediction model of smoke backflow length is studied under mobile ventilation unit (MVU) in tunnel fires. The dimensional analysis method is adopted to deduce the expressions of smoke backflow length. Based on the numerical simulation validated by the experiments, the effects of MVU location, fan flow and fire source heat release rate on backflow length are investigated, respectively. Furthermore, artificial neural network is used for data augmentation to obtain the smoke backflow length in a wider range of data. Eventually, the optimal location for mobile fan is established, and a new dimensionless prediction model of smoke backflow length with MVU is proposed. This model is helpful to provide guidance for smoke control in tunnel fire during emergency rescue.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
隧道火灾中移动通风的烟气回流长度预测无量纲模型
隧道火灾中的烟雾是造成人员伤亡的主要因素。移动通风技术可以通过移动风机有效控制烟雾,改善隧道内的通风条件,尤其是应急救援。烟气倒流是隧道火灾的一个重要特征,烟气倒流长度是烟气控制效果的评价指标。本文研究了隧道火灾中移动通风装置(MVU)下烟气倒流长度的预测模型。采用尺寸分析法推导烟气倒流长度的表达式。在数值模拟的基础上,通过实验验证,分别研究了 MVU 位置、风机流量和火源热释放率对回流长度的影响。此外,还利用人工神经网络进行数据增强,以获得更大数据范围内的烟气回流长度。最终,确定了移动风机的最佳位置,并提出了一种新的带 MVU 的烟气倒流长度无量纲预测模型。该模型有助于为隧道火灾应急救援中的烟雾控制提供指导。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Thermal Science and Engineering Progress
Thermal Science and Engineering Progress Chemical Engineering-Fluid Flow and Transfer Processes
CiteScore
7.20
自引率
10.40%
发文量
327
审稿时长
41 days
期刊介绍: Thermal Science and Engineering Progress (TSEP) publishes original, high-quality research articles that span activities ranging from fundamental scientific research and discussion of the more controversial thermodynamic theories, to developments in thermal engineering that are in many instances examples of the way scientists and engineers are addressing the challenges facing a growing population – smart cities and global warming – maximising thermodynamic efficiencies and minimising all heat losses. It is intended that these will be of current relevance and interest to industry, academia and other practitioners. It is evident that many specialised journals in thermal and, to some extent, in fluid disciplines tend to focus on topics that can be classified as fundamental in nature, or are ‘applied’ and near-market. Thermal Science and Engineering Progress will bridge the gap between these two areas, allowing authors to make an easy choice, should they or a journal editor feel that their papers are ‘out of scope’ when considering other journals. The range of topics covered by Thermal Science and Engineering Progress addresses the rapid rate of development being made in thermal transfer processes as they affect traditional fields, and important growth in the topical research areas of aerospace, thermal biological and medical systems, electronics and nano-technologies, renewable energy systems, food production (including agriculture), and the need to minimise man-made thermal impacts on climate change. Review articles on appropriate topics for TSEP are encouraged, although until TSEP is fully established, these will be limited in number. Before submitting such articles, please contact one of the Editors, or a member of the Editorial Advisory Board with an outline of your proposal and your expertise in the area of your review.
期刊最新文献
Thermal radiation optical motion capture based on depth camera perception for basketball fatigue detection simulation Model-based analysis of the effective pressure on effective thermal conductivity of porous media Thermal performance enhancement with solidification effect of nickel foam and MXene nanoenhanced PCM composite based thermal energy storages Experimental characterization of thermal and viscous powers in porous media under oscillating flow A sustainable waveguide-based design strategy for improving the energy efficiency of microwave hybrid heating systems: A combined theoretical and multi-physics simulation approach
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1