Cryogenic deformation strengthening mechanisms in FeMnSiNiAl high-entropy alloys

Abstract

The mechanical properties and deformation mechanisms of a newly developed Co-free FeMnSiNiAl high entropy alloy (HEA) at room and cryogenic temperatures were systematically investigated. The initial tensile deformation at room temperature was dominated by dislocation slipping, with modest strengthening from the Transformation-Induced Plasticity (TRIP) effect due to the deformation-induced FCC → HCP martensitic transformation. Subsequently, the TRIP effect was markedly enhanced during the middle and later stages of deformation, leading to an excellent combination of yield strength (σ_y, 315.1 MPa), ultimate tensile strength (σ_u, 773.4 MPa), and fracture elongations (ε_f, 78.3 %). The strengthening by the TRIP effect was significantly enhanced at cryogenic temperatures as a result of enhanced FCC → HCP martensitic transformation. This resulted in a synergetic improvement in strength and ductility at 223 K, with σ_y of 363.6 MPa, σ_u of 832.1 MPa, and ε_f of 87.2 %. The enhanced ductility at 223 K was linked to the FCC → HCP → BCC sequential martensitic transformation during the middle and later stages of deformation, which acted as an additional way to accommodate plastic strain and delay strain localization. However, the rapid FCC → HCP transformation at the early stage of deformation at 173 K and 77 K impeded the FCC → HCP → BCC sequential martensitic transformation during subsequent deformation stages, thus remarkably enhancing strength but reducing ductility. Our findings provide new insights into the design and development of TRIP-assisted single-phase FCC HEAs for cryogenic applications.