Effect of the Total Saponins of Bupleurum chinense DC. Water Extracts Following Ultrafiltration Pretreatment on Macroporous Resin Adsorption.

Abstract

Macroporous resin is an efficient separation technology that plays a crucial role in the separation and purification of traditional Chinese medicine (TCM). However, the application of macroporous resins in TCM pharmaceuticals is hindered by serious fouling caused by the complex materials used in TCM. This study examines the impact of ultrafiltration (UF) membrane technology on the macroporous resin adsorption behavior of TCM extracts. In this paper, Bupleurum chinense DC. (B. chinense) water extracts were included as an example to study the effect of UF pretreatment on the macroporous resin adsorption of total saponins. The study results indicated that the adsorption of total saponins constituents from the water extracts of B. chinense on the macroporous resin followed the pseudo-second-order kinetic model and the Langmuir model. The thermodynamic parameters of adsorption, including enthalpy changes and Gibbs free energies, were negative, while entropy changes were positive. These results demonstrated that the total saponin components form a monolayer adsorption layer by spontaneous thermal adsorption on the macroporous resin, and that the adsorption rate is not determined by the rate of intraparticle diffusion. Following treatment with a UF membrane with an average molecular weight cut-off of 50 kDa, the protein, starch, pectin, tannin, and other impurities in the water extracts of B. chinense were reduced, while the total saponin content was retained at 82.32%. The adsorption kinetic model of the saponin constituents on the macroporous resin remained unchanged and was consistent with both the second-order kinetic model and the Langmuir model; the adsorption rate of the second-order kinetic model increased by 1.3 times and in the Langmuir model at 25 °C, the adsorption performance improved by 1.16 times compared to the original extracts. This study revealed that UF technology as a pretreatment method can reduce the fouling of macroporous resin by TCM extracts and improve the adsorption performance of macroporous resin.