An in-situ Raman spectroscopy investigation of the oxidation of proton irradiated and cold-worked 304L stainless steel in oxygenated water at 300°C

IF 5.3 2区 材料科学 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY Scripta Materialia Pub Date : 2024-11-11 DOI:10.1016/j.scriptamat.2024.116447
V.S. Ramsundar, A. Shaik, K. Daub, M.R. Daymond, S.Y. Persaud
{"title":"An in-situ Raman spectroscopy investigation of the oxidation of proton irradiated and cold-worked 304L stainless steel in oxygenated water at 300°C","authors":"V.S. Ramsundar,&nbsp;A. Shaik,&nbsp;K. Daub,&nbsp;M.R. Daymond,&nbsp;S.Y. Persaud","doi":"10.1016/j.scriptamat.2024.116447","DOIUrl":null,"url":null,"abstract":"<div><div>A facility consisting of a high temperature and pressure corrosion loop coupled with in-situ Raman spectroscopy and proton irradiation has been used to investigate the oxide development on as-received, cold-worked and proton-irradiated 304 L stainless steel (SS) in water at 300 °C over a 48-hour period. Chemical and semi-quantitative kinetic information were obtained. The as-received and 0.1 dpa SS displayed similar oxidation kinetics and chemistry across all timespans, indicating that the damage imparted by protons was not sufficient in this case to manifest a detectable change in the oxide. However, modifications in the spinel oxide chemistry and increased oxidation kinetics with time were observed for the 3.0 dpa and cold-worked SS.</div></div>","PeriodicalId":423,"journal":{"name":"Scripta Materialia","volume":"257 ","pages":"Article 116447"},"PeriodicalIF":5.3000,"publicationDate":"2024-11-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Scripta Materialia","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1359646224004822","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

A facility consisting of a high temperature and pressure corrosion loop coupled with in-situ Raman spectroscopy and proton irradiation has been used to investigate the oxide development on as-received, cold-worked and proton-irradiated 304 L stainless steel (SS) in water at 300 °C over a 48-hour period. Chemical and semi-quantitative kinetic information were obtained. The as-received and 0.1 dpa SS displayed similar oxidation kinetics and chemistry across all timespans, indicating that the damage imparted by protons was not sufficient in this case to manifest a detectable change in the oxide. However, modifications in the spinel oxide chemistry and increased oxidation kinetics with time were observed for the 3.0 dpa and cold-worked SS.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
质子辐照和冷加工的 304L 不锈钢在 300°C 含氧水中氧化的原位拉曼光谱研究
我们利用由高温高压腐蚀环路、原位拉曼光谱和质子辐照组成的设备,研究了在 300 °C 的水中,原样接收、冷加工和质子辐照 304 L 不锈钢(SS)在 48 小时内的氧化物发展情况。研究获得了化学和半定量动力学信息。原样和 0.1 dpa 的不锈钢在所有时间段内都显示出相似的氧化动力学和化学性质,这表明质子造成的破坏不足以使氧化物发生可检测的变化。然而,在 3.0 dpa 和冷加工 SS 中观察到尖晶石氧化物化学性质发生了变化,氧化动力学随时间的推移而增加。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Scripta Materialia
Scripta Materialia 工程技术-材料科学:综合
CiteScore
11.40
自引率
5.00%
发文量
581
审稿时长
34 days
期刊介绍: Scripta Materialia is a LETTERS journal of Acta Materialia, providing a forum for the rapid publication of short communications on the relationship between the structure and the properties of inorganic materials. The emphasis is on originality rather than incremental research. Short reports on the development of materials with novel or substantially improved properties are also welcomed. Emphasis is on either the functional or mechanical behavior of metals, ceramics and semiconductors at all length scales.
期刊最新文献
Effect of B4C addition on the microstructure and mechanical properties of 304L austenitic stainless steel fabricated using laser powder bed fusion Modelling the evolution of microstructural bands in a martensite/austenite Q&P-processed stainless steel Editorial Board Strain glass state in Ni50.3Ti29.7Hf20 high-temperature shape memory alloy An in-situ Raman spectroscopy investigation of the oxidation of proton irradiated and cold-worked 304L stainless steel in oxygenated water at 300°C
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1