Nicolas Leost , Djamel Missoum-Benziane , Matthieu Rambaudon , Laurent Cameriano , François Comte , Brice Le Pannerer , Vincent Maurel
{"title":"Short fatigue crack growth sensitivity to thermo-mechanical fatigue loading","authors":"Nicolas Leost , Djamel Missoum-Benziane , Matthieu Rambaudon , Laurent Cameriano , François Comte , Brice Le Pannerer , Vincent Maurel","doi":"10.1016/j.ijfatigue.2024.108651","DOIUrl":null,"url":null,"abstract":"<div><div>Most high-temperature components are subject to out-of-phase thermomechanical fatigue (OP-TMF), which induces crack growth at low temperatures. However, OP-TMF has been little studied in the context of short cracks. This study focuses on the experimental sensitivity of OP-TMF loading conditions playing on temperature range, gradient, and dwell time for thin sheet superalloy specimens. The material of interest is a Co-based superalloy, HA188. It is widely used in combustion chambers.</div><div>The experimental analysis is based on full-field measurements for temperature, strain and damage by infrared thermography, digital image correlation and high resolution images from 300 to 900<!--> <!-->°C. The main conclusion is that the temperature gradient, together with the temperature amplitude, largely determines the strain amplitude and subsequent fatigue crack growth rate (FCGR) of short cracks. In situ measurements of damage and crack closure were obtained using supervised machine learning based on images. This clarifies that crack closure is only partial and that the crack network growth rate is consistent with the individual short crack growth rate. Finally, 3D finite element analysis considering realistic temperature field and strain energy based FCGR model was able to evaluate the fatigue life in this context. It is shown that the OP-TMF FCGR is very close to the FCGR of the maximum temperature of the TMF cycle due to partial crack closure.</div></div>","PeriodicalId":14112,"journal":{"name":"International Journal of Fatigue","volume":"191 ","pages":"Article 108651"},"PeriodicalIF":5.7000,"publicationDate":"2024-10-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Fatigue","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0142112324005103","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0
Abstract
Most high-temperature components are subject to out-of-phase thermomechanical fatigue (OP-TMF), which induces crack growth at low temperatures. However, OP-TMF has been little studied in the context of short cracks. This study focuses on the experimental sensitivity of OP-TMF loading conditions playing on temperature range, gradient, and dwell time for thin sheet superalloy specimens. The material of interest is a Co-based superalloy, HA188. It is widely used in combustion chambers.
The experimental analysis is based on full-field measurements for temperature, strain and damage by infrared thermography, digital image correlation and high resolution images from 300 to 900 °C. The main conclusion is that the temperature gradient, together with the temperature amplitude, largely determines the strain amplitude and subsequent fatigue crack growth rate (FCGR) of short cracks. In situ measurements of damage and crack closure were obtained using supervised machine learning based on images. This clarifies that crack closure is only partial and that the crack network growth rate is consistent with the individual short crack growth rate. Finally, 3D finite element analysis considering realistic temperature field and strain energy based FCGR model was able to evaluate the fatigue life in this context. It is shown that the OP-TMF FCGR is very close to the FCGR of the maximum temperature of the TMF cycle due to partial crack closure.
期刊介绍：
Typical subjects discussed in International Journal of Fatigue address:
Novel fatigue testing and characterization methods (new kinds of fatigue tests, critical evaluation of existing methods, in situ measurement of fatigue degradation, non-contact field measurements)
Multiaxial fatigue and complex loading effects of materials and structures, exploring state-of-the-art concepts in degradation under cyclic loading
Fatigue in the very high cycle regime, including failure mode transitions from surface to subsurface, effects of surface treatment, processing, and loading conditions
Modeling (including degradation processes and related driving forces, multiscale/multi-resolution methods, computational hierarchical and concurrent methods for coupled component and material responses, novel methods for notch root analysis, fracture mechanics, damage mechanics, crack growth kinetics, life prediction and durability, and prediction of stochastic fatigue behavior reflecting microstructure and service conditions)
Models for early stages of fatigue crack formation and growth that explicitly consider microstructure and relevant materials science aspects
Understanding the influence or manufacturing and processing route on fatigue degradation, and embedding this understanding in more predictive schemes for mitigation and design against fatigue
Prognosis and damage state awareness (including sensors, monitoring, methodology, interactive control, accelerated methods, data interpretation)
Applications of technologies associated with fatigue and their implications for structural integrity and reliability. This includes issues related to design, operation and maintenance, i.e., life cycle engineering
Smart materials and structures that can sense and mitigate fatigue degradation
Fatigue of devices and structures at small scales, including effects of process route and surfaces/interfaces.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
