Reduction of Dynamic Spatial Distortion of Miniaturized Streak Tube Using Deflection Compensation Technique

IF 5.6 2区 工程技术 Q1 ENGINEERING, ELECTRICAL & ELECTRONIC IEEE Transactions on Instrumentation and Measurement Pub Date : 2024-10-23 DOI:10.1109/TIM.2024.3485443
Yanli Bai;Yi Jiang;Wenlong Lv;Songchun Li;Guochun Huang;Luye Liang;Si Zhong
{"title":"Reduction of Dynamic Spatial Distortion of Miniaturized Streak Tube Using Deflection Compensation Technique","authors":"Yanli Bai;Yi Jiang;Wenlong Lv;Songchun Li;Guochun Huang;Luye Liang;Si Zhong","doi":"10.1109/TIM.2024.3485443","DOIUrl":null,"url":null,"abstract":"In miniaturized streak tube (MST), the scanning electric field, while deflecting dynamic imaging, inevitably causes dynamic spatial distortion (DSD), declining dynamic spatial resolution (DSR) uniformity and hindering large-area applications. To mitigate these cases, a compensation system has been devised, aiming to reduce DSD and enhance DSR uniformity by the application of the falling edge of V-shaped high-voltage pulse (VHVP). The research results demonstrate the VHVP, featuring a rising edge slope of 12.68 kV/ns and a falling edge slope of 15.22 kV/ns, which successfully generated by the Marx circuit combined with the LC filter. When the VHVP, in conjunction with the deflection compensation technique (DCT), was implemented in the MST, a notable reduction in DSD was achieved. Specifically, within a \n<inline-formula> <tex-math>$\\Phi 30$ </tex-math></inline-formula>\n-mm detection area, the DSD ratio has been decreased from 35.61% to 12.09%, accompanied by 5.45% improvement in DSR uniformity at 15-mm OFF-axis. Furthermore, comparative analysis revealed that compared to an MST with \n<inline-formula> <tex-math>$\\Phi 16$ </tex-math></inline-formula>\n-mm detection area, which utilized a curved cathode and spherical phosphor screen (PS) to achieve 2.31% improvement ratio, the proposed DCT demonstrated significant 17.36% improvement ratio at an 8-mm OFF-axis point. These findings present a universal and effective approach for the technical enhancement of MST performance.","PeriodicalId":13341,"journal":{"name":"IEEE Transactions on Instrumentation and Measurement","volume":"73 ","pages":"1-7"},"PeriodicalIF":5.6000,"publicationDate":"2024-10-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Transactions on Instrumentation and Measurement","FirstCategoryId":"5","ListUrlMain":"https://ieeexplore.ieee.org/document/10731879/","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0

Abstract

In miniaturized streak tube (MST), the scanning electric field, while deflecting dynamic imaging, inevitably causes dynamic spatial distortion (DSD), declining dynamic spatial resolution (DSR) uniformity and hindering large-area applications. To mitigate these cases, a compensation system has been devised, aiming to reduce DSD and enhance DSR uniformity by the application of the falling edge of V-shaped high-voltage pulse (VHVP). The research results demonstrate the VHVP, featuring a rising edge slope of 12.68 kV/ns and a falling edge slope of 15.22 kV/ns, which successfully generated by the Marx circuit combined with the LC filter. When the VHVP, in conjunction with the deflection compensation technique (DCT), was implemented in the MST, a notable reduction in DSD was achieved. Specifically, within a $\Phi 30$ -mm detection area, the DSD ratio has been decreased from 35.61% to 12.09%, accompanied by 5.45% improvement in DSR uniformity at 15-mm OFF-axis. Furthermore, comparative analysis revealed that compared to an MST with $\Phi 16$ -mm detection area, which utilized a curved cathode and spherical phosphor screen (PS) to achieve 2.31% improvement ratio, the proposed DCT demonstrated significant 17.36% improvement ratio at an 8-mm OFF-axis point. These findings present a universal and effective approach for the technical enhancement of MST performance.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
利用偏差补偿技术减少微型化条纹管的动态空间失真
在微型条纹管(MST)中,扫描电场在偏转动态成像的同时,不可避免地会造成动态空间失真(DSD),降低动态空间分辨率(DSR)的均匀性,妨碍大面积应用。为了缓解这些情况,我们设计了一种补偿系统,旨在通过应用 V 型高压脉冲(VHVP)的下降沿来减少 DSD 并提高 DSR 的均匀性。研究结果表明,VHVP 的上升沿斜率为 12.68 kV/ns,下降沿斜率为 15.22 kV/ns,由 Marx 电路与 LC 滤波器结合成功产生。当 VHVP 与偏转补偿技术(DCT)结合在 MST 中实施时,DSD 显著减少。具体来说,在 30 毫米的检测区域内,DSD 比率从 35.61% 降至 12.09%,同时在离轴 15 毫米处,DSR 一致性提高了 5.45%。此外,对比分析表明,与利用弯曲阴极和球形荧光屏(PS)实现 2.31% 改进率的 $\Phi 16$ -mm 检测面积的 MST 相比,所提出的 DCT 在 8 mm 离轴点上实现了 17.36% 的显著改进率。这些发现为从技术上提高 MST 性能提供了一种通用而有效的方法。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
IEEE Transactions on Instrumentation and Measurement
IEEE Transactions on Instrumentation and Measurement 工程技术-工程:电子与电气
CiteScore
9.00
自引率
23.20%
发文量
1294
审稿时长
3.9 months
期刊介绍: Papers are sought that address innovative solutions to the development and use of electrical and electronic instruments and equipment to measure, monitor and/or record physical phenomena for the purpose of advancing measurement science, methods, functionality and applications. The scope of these papers may encompass: (1) theory, methodology, and practice of measurement; (2) design, development and evaluation of instrumentation and measurement systems and components used in generating, acquiring, conditioning and processing signals; (3) analysis, representation, display, and preservation of the information obtained from a set of measurements; and (4) scientific and technical support to establishment and maintenance of technical standards in the field of Instrumentation and Measurement.
期刊最新文献
Errata to “A Spherical Coil Array for the Calibration of Whole-Head Magnetoencephalograph Systems” Adaptive EPI-Matching Cost for Light Field Disparity Estimation Robust Surface Area Measurement of Unorganized Point Clouds Based on Multiscale Supervoxel Segmentation Optimized Fuzzy Slope Entropy: A Complexity Measure for Nonlinear Time Series A Multidepth Step-Training Convolutional Neural Network for Power Machinery Fault Diagnosis Under Variable Loads
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1