Boiling heat transfer enhancement on heterogeneous copper foams in the presence of transverse flow

IF 6.1 2区 工程技术 Q2 ENERGY & FUELS Applied Thermal Engineering Pub Date : 2024-11-19 DOI:10.1016/j.applthermaleng.2024.124990
Shilin Lei, Cai Hu, Zijing Li, Shuai Tan, Caihong Wang, Yong Wu
{"title":"Boiling heat transfer enhancement on heterogeneous copper foams in the presence of transverse flow","authors":"Shilin Lei,&nbsp;Cai Hu,&nbsp;Zijing Li,&nbsp;Shuai Tan,&nbsp;Caihong Wang,&nbsp;Yong Wu","doi":"10.1016/j.applthermaleng.2024.124990","DOIUrl":null,"url":null,"abstract":"<div><div>Open cell copper foams are widely employed to enhance boiling heat transfer, but homogeneous foams face a trade-off between promotion in wetted area and reduction in resistance to bubble departure. In this work, heterogeneous copper foams with horizontal gradient are proposed to assure both enlarged wetted area and facilitated bubble departure. Boiling of HFE-7100 on the heterogeneous foams consisting of 30 pore per inch (PPI) square core and 60 PPI frame with different projection area fractions and thicknesses is conducted under the conditions of forced transverse flow. A peak heat transfer coefficient (HTC) of 5.4 W cm<sup>−2</sup> K<sup>−1</sup> and a critical heat flux (CHF) of 91.4 W cm<sup>−2</sup> are obtained on the heterogeneous foam having a core thickness of 5 mm and a frame thickness of 2 mm. The difference in thickness delays the formation of vapor blanket on the foam to promote CHF and the difference in pore density favors balanced surface wetting and vapor venting to enhance HTC. Vapor bubbles on the copper foams are visually observed and a semi-empirical model correlating CHF with heterogenous geometric parameters of the foam is proposed. This work offers an optional strategy to further enhance boiling heat transfer on porous mediums.</div></div>","PeriodicalId":8201,"journal":{"name":"Applied Thermal Engineering","volume":"260 ","pages":"Article 124990"},"PeriodicalIF":6.1000,"publicationDate":"2024-11-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Thermal Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1359431124026589","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
引用次数: 0

Abstract

Open cell copper foams are widely employed to enhance boiling heat transfer, but homogeneous foams face a trade-off between promotion in wetted area and reduction in resistance to bubble departure. In this work, heterogeneous copper foams with horizontal gradient are proposed to assure both enlarged wetted area and facilitated bubble departure. Boiling of HFE-7100 on the heterogeneous foams consisting of 30 pore per inch (PPI) square core and 60 PPI frame with different projection area fractions and thicknesses is conducted under the conditions of forced transverse flow. A peak heat transfer coefficient (HTC) of 5.4 W cm−2 K−1 and a critical heat flux (CHF) of 91.4 W cm−2 are obtained on the heterogeneous foam having a core thickness of 5 mm and a frame thickness of 2 mm. The difference in thickness delays the formation of vapor blanket on the foam to promote CHF and the difference in pore density favors balanced surface wetting and vapor venting to enhance HTC. Vapor bubbles on the copper foams are visually observed and a semi-empirical model correlating CHF with heterogenous geometric parameters of the foam is proposed. This work offers an optional strategy to further enhance boiling heat transfer on porous mediums.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
横向流动时异质铜泡沫上的沸腾传热增强效应
开孔铜泡沫被广泛用于增强沸腾传热,但均质泡沫面临着增加润湿面积和减少气泡离开阻力之间的权衡。本研究提出了具有水平梯度的异质铜泡沫,以确保扩大润湿面积和促进气泡离开。在强制横向流动的条件下,HFE-7100 在由每英寸 30 个孔隙(PPI)的方形核心和 60 个孔隙(PPI)的框架组成的异质泡沫上沸腾。芯材厚度为 5 毫米、框架厚度为 2 毫米的异质泡沫的峰值传热系数(HTC)为 5.4 W cm-2 K-1,临界热通量(CHF)为 91.4 W cm-2。厚度的差异延迟了泡沫上蒸汽毯的形成,从而促进了 CHF,而孔隙密度的差异则有利于表面润湿和蒸汽排出的平衡,从而提高了 HTC。通过目测观察到了铜泡沫上的蒸汽气泡,并提出了一个半经验模型,该模型将 CHF 与泡沫的异质几何参数相关联。这项工作为进一步增强多孔介质上的沸腾传热提供了一种可选策略。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Applied Thermal Engineering
Applied Thermal Engineering 工程技术-工程:机械
CiteScore
11.30
自引率
15.60%
发文量
1474
审稿时长
57 days
期刊介绍: Applied Thermal Engineering disseminates novel research related to the design, development and demonstration of components, devices, equipment, technologies and systems involving thermal processes for the production, storage, utilization and conservation of energy, with a focus on engineering application. The journal publishes high-quality and high-impact Original Research Articles, Review Articles, Short Communications and Letters to the Editor on cutting-edge innovations in research, and recent advances or issues of interest to the thermal engineering community.
期刊最新文献
Editorial Board Naturally circulated system under low to moderate heating condition with supercritical fluid: A comprehensive investigation of loop orientation and Ledinegg instability Novel fabrication of polyethylene glycol/ceramic composite pellets with an excellent phase change shape stable trait and their potential applications for greenhouse insulation Thermal-mechanical behavior of deeply buried pipe energy pile group in sand obtained from model test Performance of a greenhouse heating system utilizing energy transfer between greenhouses based on the dual source heat pump
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1