Nonlinear transient analysis of delaminated composite shell panel under hygro-thermo-mechanical load and experimental validation

IF 8.1 2区 材料科学 Q1 ENGINEERING, MANUFACTURING Composites Part A: Applied Science and Manufacturing Pub Date : 2024-11-21 DOI:10.1016/j.compositesa.2024.108587
Chetan Kumar Hirwani , Naveen Kumar Akkasali , Erukala Kalyan Kumar , Ravi Kumar , Amit Kumar Mehar , Subrata Kumar Panda
{"title":"Nonlinear transient analysis of delaminated composite shell panel under hygro-thermo-mechanical load and experimental validation","authors":"Chetan Kumar Hirwani ,&nbsp;Naveen Kumar Akkasali ,&nbsp;Erukala Kalyan Kumar ,&nbsp;Ravi Kumar ,&nbsp;Amit Kumar Mehar ,&nbsp;Subrata Kumar Panda","doi":"10.1016/j.compositesa.2024.108587","DOIUrl":null,"url":null,"abstract":"<div><div>In this work, the nonlinear time-dependent deflection responses of delaminated composite shell panel structure under the influence of hygro-thermo-mechanical loading have been investigated numerically. To develop a mathematical model, two different higher-order displacement kinematics, Green-Lagrange’s nonlinear strain–displacement relations and two sub-laminate approaches are adopted for delaminated panel structure in association with finite element steps. The delaminated composite shell panel is under the three simultaneous loading, i.e., humidity, temperature, and mechanical loading. The nonlinear time-dependent responses are obtained by solving the governing equation using the direct iterative method and Newmark’s integration technique. The influence of delamination parameters (size, location, and position), geometry and loading on dynamic characteristics have been analyzed. The differences in responses indicated that the kinematic model with higher degrees of freedom generally shows higher deflection values. Further, a detailed discussion of the numerical illustrations and conclusive remarks based on the findings of the numerical illustrations have been provided.</div></div>","PeriodicalId":282,"journal":{"name":"Composites Part A: Applied Science and Manufacturing","volume":"189 ","pages":"Article 108587"},"PeriodicalIF":8.1000,"publicationDate":"2024-11-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Composites Part A: Applied Science and Manufacturing","FirstCategoryId":"1","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1359835X24005852","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
引用次数: 0

Abstract

In this work, the nonlinear time-dependent deflection responses of delaminated composite shell panel structure under the influence of hygro-thermo-mechanical loading have been investigated numerically. To develop a mathematical model, two different higher-order displacement kinematics, Green-Lagrange’s nonlinear strain–displacement relations and two sub-laminate approaches are adopted for delaminated panel structure in association with finite element steps. The delaminated composite shell panel is under the three simultaneous loading, i.e., humidity, temperature, and mechanical loading. The nonlinear time-dependent responses are obtained by solving the governing equation using the direct iterative method and Newmark’s integration technique. The influence of delamination parameters (size, location, and position), geometry and loading on dynamic characteristics have been analyzed. The differences in responses indicated that the kinematic model with higher degrees of freedom generally shows higher deflection values. Further, a detailed discussion of the numerical illustrations and conclusive remarks based on the findings of the numerical illustrations have been provided.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
湿热力学载荷下分层复合壳体面板的非线性瞬态分析与实验验证
本研究采用数值方法研究了分层复合壳板结构在湿热机械荷载影响下的非线性随时间变化的挠度响应。为了建立数学模型,采用了两种不同的高阶位移运动学、格林-拉格朗日非线性应变-位移关系和两种子层板方法,并结合有限元步骤对分层板结构进行了研究。分层复合壳体面板同时承受三种荷载,即湿度、温度和机械荷载。通过使用直接迭代法和纽马克积分技术求解控制方程,得到了非线性随时间变化的响应。分析了分层参数(尺寸、位置和位置)、几何形状和加载对动态特性的影响。响应的差异表明,自由度较高的运动模型通常显示出较高的挠度值。此外,还提供了对数值图解的详细讨论以及基于数值图解结果的结论性意见。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Composites Part A: Applied Science and Manufacturing
Composites Part A: Applied Science and Manufacturing 工程技术-材料科学:复合
CiteScore
15.20
自引率
5.70%
发文量
492
审稿时长
30 days
期刊介绍: Composites Part A: Applied Science and Manufacturing is a comprehensive journal that publishes original research papers, review articles, case studies, short communications, and letters covering various aspects of composite materials science and technology. This includes fibrous and particulate reinforcements in polymeric, metallic, and ceramic matrices, as well as 'natural' composites like wood and biological materials. The journal addresses topics such as properties, design, and manufacture of reinforcing fibers and particles, novel architectures and concepts, multifunctional composites, advancements in fabrication and processing, manufacturing science, process modeling, experimental mechanics, microstructural characterization, interfaces, prediction and measurement of mechanical, physical, and chemical behavior, and performance in service. Additionally, articles on economic and commercial aspects, design, and case studies are welcomed. All submissions undergo rigorous peer review to ensure they contribute significantly and innovatively, maintaining high standards for content and presentation. The editorial team aims to expedite the review process for prompt publication.
期刊最新文献
A novel and facile method for the synthesis of rGO/ZnO nanocomposite and its versatile use in water treatment Micro-void nucleation at fiber-tips within the microstructure of additively manufactured polymer composites bead Solvent-free mechanochemistry induced one-pot scalable fabrication of phosphorus wrapped keratin and its application as a synergistic flame retardant in epoxy resin Interlaminar toughening and self-healing mechanism for hard-and-soft layered composite laminates Reactive extrusion of frontally polymerizing continuous carbon fiber reinforced polymer composites
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1