Patterning Planar, Flexible Li-S Battery Full Cells on Laser-Induced Graphene Traces.

Abstract

Laser conversion of commercial polymers to laser-induced graphene (LIG) using inexpensive and accessible CO₂ lasers has enabled the rapid prototyping of promising electronic and electrochemical devices. Frequently used to pattern interdigitated supercapacitors, few approaches have been developed to pattern batteries-in particular, full cells. Herein, we report an LIG-based approach to a planar, interdigitated Li-S battery. We show that sulfur can be deposited by selective nucleation and growth on the LIG cathode fingers in a supersaturated sulfur solution. Melt imbibition then leads to loadings as high as 3.9 mg/cm² and 75 wt% sulfur. Lithium metal anodes are electrodeposited onto the LIG anode fingers by a silver-seeded, pulse-reverse-pulse method that enables loadings up to 10.5 mAh/cm² to be deposited without short-circuiting the interdigitated structure. The resulting binder/separator-free flexible battery achieves a capacity of over 1 mAh/cm² and an energy density of 200 mWh/cm³. Unfortunately, due to the use of near stoichiometric lithium, the cycle-life is sensitive to lithium degradation. While future work will be necessary to make this a practical, flexible battery, the interdigitated structure is well-suited to future operando and ex situ studies of Li-S and related battery chemistries.