Size regulation of Pt cocatalysts and its effect on the performance of photocatalytic CO2 transformation to CH4

Q3 Energy 燃料化学学报 Pub Date : 2024-12-01 DOI:10.1016/S1872-5813(24)60472-X
Yao CHEN , Chaoqiu CHEN , Wentao HAO , Wenlong WANG , Kun XIONG , Yong QIN
{"title":"Size regulation of Pt cocatalysts and its effect on the performance of photocatalytic CO2 transformation to CH4","authors":"Yao CHEN ,&nbsp;Chaoqiu CHEN ,&nbsp;Wentao HAO ,&nbsp;Wenlong WANG ,&nbsp;Kun XIONG ,&nbsp;Yong QIN","doi":"10.1016/S1872-5813(24)60472-X","DOIUrl":null,"url":null,"abstract":"<div><div>Platinum is one of the most efficient cocatalysts for photocatalytic reduction of carbon dioxide (CO<sub>2</sub>) to methane (CH<sub>4</sub>), but it still suffers from low CO<sub>2</sub> reduction rate and low selectivity of CH<sub>4</sub>. In this study, Pt/TiO<sub>2</sub> catalysts with adjustable Pt particle size (0.55-1.80 nm) were prepared by atomic layer deposition (ALD) and used for photocatalytic reduction of CO<sub>2</sub> to CH<sub>4</sub>. The CH<sub>4</sub> yield and selectivity of the Pt/TiO<sub>2</sub> catalysts showed a volcanic variation trend with the increase of Pt particle size. The 10Pt/TiO<sub>2</sub> with Pt particle size of 1.35 nm exhibit the highest methane yield (71.9 μmol/(g·h)). Especially, a high electron-based selectivity of 81.69% for CH<sub>4</sub> (product-based selectivity of 90.20%), and 100% for hydrocarbons (CH<sub>4</sub>, C<sub>2</sub>H<sub>6</sub>, and C<sub>3</sub>H<sub>8</sub>) are achieved, no H<sub>2</sub> formation was detected. The CO-DRIFTS, XPS, CO<sub>2</sub>-TPD, H<sub>2</sub>O-TPD, and H<sub>2</sub>-TPD characterizations suggest that the 10Pt/TiO<sub>2</sub> exhibited optimal CO<sub>2</sub> adsorption/activation capacity, suitable H<sub>2</sub>O activation capacity, and higher hydrogen desorption temperature, making the generation rate of active hydrogen species from H<sub>2</sub>O matches their consumption rate for CO<sub>2</sub> hydrogenation. This study opens an avenue for rationally designing highly efficient and selective photocatalysts for photocatalytic CO<sub>2</sub> reduction.</div></div>","PeriodicalId":15956,"journal":{"name":"燃料化学学报","volume":"52 12","pages":"Pages 1798-1809"},"PeriodicalIF":0.0000,"publicationDate":"2024-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"燃料化学学报","FirstCategoryId":"1087","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S187258132460472X","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Energy","Score":null,"Total":0}
引用次数: 0

Abstract

Platinum is one of the most efficient cocatalysts for photocatalytic reduction of carbon dioxide (CO2) to methane (CH4), but it still suffers from low CO2 reduction rate and low selectivity of CH4. In this study, Pt/TiO2 catalysts with adjustable Pt particle size (0.55-1.80 nm) were prepared by atomic layer deposition (ALD) and used for photocatalytic reduction of CO2 to CH4. The CH4 yield and selectivity of the Pt/TiO2 catalysts showed a volcanic variation trend with the increase of Pt particle size. The 10Pt/TiO2 with Pt particle size of 1.35 nm exhibit the highest methane yield (71.9 μmol/(g·h)). Especially, a high electron-based selectivity of 81.69% for CH4 (product-based selectivity of 90.20%), and 100% for hydrocarbons (CH4, C2H6, and C3H8) are achieved, no H2 formation was detected. The CO-DRIFTS, XPS, CO2-TPD, H2O-TPD, and H2-TPD characterizations suggest that the 10Pt/TiO2 exhibited optimal CO2 adsorption/activation capacity, suitable H2O activation capacity, and higher hydrogen desorption temperature, making the generation rate of active hydrogen species from H2O matches their consumption rate for CO2 hydrogenation. This study opens an avenue for rationally designing highly efficient and selective photocatalysts for photocatalytic CO2 reduction.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
求助全文
约1分钟内获得全文 去求助
来源期刊
燃料化学学报
燃料化学学报 Chemical Engineering-Chemical Engineering (all)
CiteScore
2.80
自引率
0.00%
发文量
5825
期刊介绍: Journal of Fuel Chemistry and Technology (Ranliao Huaxue Xuebao) is a Chinese Academy of Sciences(CAS) journal started in 1956, sponsored by the Chinese Chemical Society and the Institute of Coal Chemistry, Chinese Academy of Sciences(CAS). The journal is published bimonthly by Science Press in China and widely distributed in about 20 countries. Journal of Fuel Chemistry and Technology publishes reports of both basic and applied research in the chemistry and chemical engineering of many energy sources, including that involved in the nature, processing and utilization of coal, petroleum, oil shale, natural gas, biomass and synfuels, as well as related subjects of increasing interest such as C1 chemistry, pollutions control and new catalytic materials. Types of publications include original research articles, short communications, research notes and reviews. Both domestic and international contributors are welcome. Manuscripts written in Chinese or English will be accepted. Additional English titles, abstracts and key words should be included in Chinese manuscripts. All manuscripts are subject to critical review by the editorial committee, which is composed of about 10 foreign and 50 Chinese experts in fuel science. Journal of Fuel Chemistry and Technology has been a source of primary research work in fuel chemistry as a Chinese core scientific periodical.
期刊最新文献
Advancements in chromium-tolerant air electrode for solid oxide cells: A mini-review Progress of elevated-temperature alkaline electrolysis hydrogen production and alkaline fuel cells power generation Sc-doped strontium iron molybdenum cathode for high-efficiency CO2 electrolysis in solid oxide electrolysis cell A high entropy stabilized perovskite oxide La0.2Pr0.2Sm0.2Gd0.2Sr0.2Co0.8Fe0.2O3−δ as a promising air electrode for reversible solid oxide cells Performance optimization of anodic porous transport layer in proton exchange membrane electrolyzer using multilayer perceptron model
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1