Magnetic separation and recovery of powder particles from water using Fe3O4@CTS-BDAT

IF 8.1 1区 工程技术 Q1 ENGINEERING, CHEMICAL Separation and Purification Technology Pub Date : 2025-03-16 DOI:10.1016/j.seppur.2025.132528
Peng Cheng, Chuang Liu, Sicong Du, Chongxuan Xu, Xu Han, Ting Zhu, Wenyan Liang
{"title":"Magnetic separation and recovery of powder particles from water using Fe3O4@CTS-BDAT","authors":"Peng Cheng, Chuang Liu, Sicong Du, Chongxuan Xu, Xu Han, Ting Zhu, Wenyan Liang","doi":"10.1016/j.seppur.2025.132528","DOIUrl":null,"url":null,"abstract":"A novel magnetic separation method has been developed to efficiently separate and recover powder particles used in water or wastewater treatment processes. The magnetic composites were prepared through the grafting of 2,4-bis(dimethylamino)-6-chloro-(1,3,5)-triazine (BDAT), chitosan (CTS), and SiO<sub>2</sub> onto the Fe<sub>3</sub>O<sub>4</sub> surface, obtaining Fe<sub>3</sub>O<sub>4</sub>@BDAT, Fe<sub>3</sub>O<sub>4</sub>@CTS, Fe<sub>3</sub>O<sub>4</sub>@CTS-BDAT, Fe<sub>3</sub>O<sub>4</sub>@SiO<sub>2</sub>@BDAT, and Fe<sub>3</sub>O<sub>4</sub>@SiO<sub>2</sub>@CTS-BDAT. g-C<sub>3</sub>N<sub>4</sub>, Ni/Fe-PAC, and La/Al-BTC were chosen as the target particles. Results showed that Fe<sub>3</sub>O<sub>4</sub>@CTS-BDAT exhibited the best separation performance, achieving efficiencies of 98.3 %, 97.2 %, and 99.1 % for the three target particles, respectively. These high efficiencies were maintained over a broad pH range (3.0–11.0) and initial target particle concentrations (50–5000 mg/L). The target particles could be detached from the magnetic aggregates using an electromagnetic field, with efficiencies exceeding 75.3 %. Characterization using SEM, XPS, and FTIR revealed that Fe<sub>3</sub>O<sub>4</sub>@CTS-BDAT possessed a microsphere cluster structure, with a saturation magnetization of 64.02 emu/g, a point of zero charge (pH<sub>PZC</sub>) of 7.7, and a d<sub>50</sub> value of 3.56 μm. Microscopic image analysis displayed that fluid kinetic energy and magnetic dipole force facilitated the formation of magnetic aggregates during the stirring stage. The size of these aggregates increased from 2 to 10 to 15–30 μm during stirring and further expanded to 18–37 μm during the separation stage. Particle image velocimetry (PIV) analysis indicated that the magnetic aggregates migrated towards the magnet via eddy currents, with maximum velocity from 0.532 to 1.412 m/s. DLVO and MDLVO models revealed that the magnetic interaction energy of Fe<sub>3</sub>O<sub>4</sub>@CTS-BDAT was sufficient to surpass electrostatic repulsion, thereby enabling efficient capture and separation of target particles.","PeriodicalId":427,"journal":{"name":"Separation and Purification Technology","volume":"33 1","pages":""},"PeriodicalIF":8.1000,"publicationDate":"2025-03-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Separation and Purification Technology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1016/j.seppur.2025.132528","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

A novel magnetic separation method has been developed to efficiently separate and recover powder particles used in water or wastewater treatment processes. The magnetic composites were prepared through the grafting of 2,4-bis(dimethylamino)-6-chloro-(1,3,5)-triazine (BDAT), chitosan (CTS), and SiO2 onto the Fe3O4 surface, obtaining Fe3O4@BDAT, Fe3O4@CTS, Fe3O4@CTS-BDAT, Fe3O4@SiO2@BDAT, and Fe3O4@SiO2@CTS-BDAT. g-C3N4, Ni/Fe-PAC, and La/Al-BTC were chosen as the target particles. Results showed that Fe3O4@CTS-BDAT exhibited the best separation performance, achieving efficiencies of 98.3 %, 97.2 %, and 99.1 % for the three target particles, respectively. These high efficiencies were maintained over a broad pH range (3.0–11.0) and initial target particle concentrations (50–5000 mg/L). The target particles could be detached from the magnetic aggregates using an electromagnetic field, with efficiencies exceeding 75.3 %. Characterization using SEM, XPS, and FTIR revealed that Fe3O4@CTS-BDAT possessed a microsphere cluster structure, with a saturation magnetization of 64.02 emu/g, a point of zero charge (pHPZC) of 7.7, and a d50 value of 3.56 μm. Microscopic image analysis displayed that fluid kinetic energy and magnetic dipole force facilitated the formation of magnetic aggregates during the stirring stage. The size of these aggregates increased from 2 to 10 to 15–30 μm during stirring and further expanded to 18–37 μm during the separation stage. Particle image velocimetry (PIV) analysis indicated that the magnetic aggregates migrated towards the magnet via eddy currents, with maximum velocity from 0.532 to 1.412 m/s. DLVO and MDLVO models revealed that the magnetic interaction energy of Fe3O4@CTS-BDAT was sufficient to surpass electrostatic repulsion, thereby enabling efficient capture and separation of target particles.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
求助全文
约1分钟内获得全文 去求助
来源期刊
Separation and Purification Technology
Separation and Purification Technology 工程技术-工程:化工
CiteScore
14.00
自引率
12.80%
发文量
2347
审稿时长
43 days
期刊介绍: Separation and Purification Technology is a premier journal committed to sharing innovative methods for separation and purification in chemical and environmental engineering, encompassing both homogeneous solutions and heterogeneous mixtures. Our scope includes the separation and/or purification of liquids, vapors, and gases, as well as carbon capture and separation techniques. However, it's important to note that methods solely intended for analytical purposes are not within the scope of the journal. Additionally, disciplines such as soil science, polymer science, and metallurgy fall outside the purview of Separation and Purification Technology. Join us in advancing the field of separation and purification methods for sustainable solutions in chemical and environmental engineering.
期刊最新文献
Study on radiation-induced polyaniline-based cellulose gel and its adsorption of methylene blue Magnetic separation and recovery of powder particles from water using Fe3O4@CTS-BDAT Efficient separation of sulfide minerals using a heterocyclic collector by regulating strong and weak interactions Mechanisms of contaminant removal with metallic iron (Fe0): A comprehensive and critical review Superhydrophobic fire-extinguishing polyurethane foam for solar-assisted high-efficiency recovery of viscous crude oil spill
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1