Highly sensitive and selective detection of benzene, toluene, xylene, and formaldehyde using Au-coated SnO2 nanorod arrays for indoor air quality monitoring

Abstract

We report the high performance of Au-coated SnO₂ nanorod gas sensors for the detection of hazardous indoor volatile organic compounds (VOCs), such as benzene, toluene, xylene, and formaldehyde (BTXF) gases. Densely ordered SnO₂ nanorod arrays were prepared via glancing angle deposition with an electron beam evaporator. The Au layer coating was used as a heterogeneous catalyst to promote the oxidation of VOCs, such as hydrocarbons. After optimizing the Au thickness, the sensor exhibited an excellent sensing response and a rapid response time of < 2.5 s for 10 ppm of BTXF gases. The maximum response was ∼662 for formaldehyde at 400 °C, ∼328 for toluene at 450 °C, ∼170 for xylene at 400 °C, and ∼139 for benzene at 500 °C, which are significantly higher than those of previously reported metal-oxide-semiconductor-based sensors. Each gas was selectively detected by integrating the sensor into a miniaturized gas chromatography (GC) system. The sensors detected ppb-level gas concentrations. Significantly, GC analysis revealed that four types of gases could be separately detected in a mixed gas within 5 min. Our study shows that Au-coated SnO₂ nanorod gas sensors integrated with GC can be used as a facile indoor pollutant monitoring system.