Facile synthesis and investigation of NiO–ZnO–Ag nanocomposites as efficient photocatalysts for degradation of methylene blue dye

IF 5.6 2区 材料科学 Q1 MATERIALS SCIENCE, CERAMICS Ceramics International Pub Date : 2019-08-15 DOI:10.1016/j.ceramint.2019.04.229
Samireh Mohammadi Aydoghmish, S.A. Hassanzadeh-Tabrizi, A. Saffar-Teluri
{"title":"Facile synthesis and investigation of NiO–ZnO–Ag nanocomposites as efficient photocatalysts for degradation of methylene blue dye","authors":"Samireh Mohammadi Aydoghmish,&nbsp;S.A. Hassanzadeh-Tabrizi,&nbsp;A. Saffar-Teluri","doi":"10.1016/j.ceramint.2019.04.229","DOIUrl":null,"url":null,"abstract":"<div><p><span><span>In the present study, NiO–ZnO–Ag photocatalytic nanocomposites were synthesized using two-stage precipitation method. The synthesized composite powders were investigated and characterized using different techniques including XRD<span><span>, FESEM, FT-IR, </span>TGA<span> and UV–Vis. XRD results showed that by increasing the Ag content, the crystallite size of ZnO decreased. FESEM micrographs showed that addition of Ag could lead to formation of more uniform particles in the size range of 30–500 nm. </span></span></span>Diffuse reflectance spectroscopy results confirmed that addition of Ag </span>nanoparticles<span> led to the increase of light absorption, which was attributed to the plasmon surface resonance of Ag. Band gap energies of NiO–ZnO, NiO–ZnO–5%Ag, NiO–ZnO–3%Ag, NiO–ZnO–1%Ag and ZnO–1%Ag were estimated to be 3.13, 3.14, 3.147, 3.19 and 3.17 eV, respectively. Investigation of degradation process showed that by adding up to 1 wt% Ag to NiO–ZnO composite led to the increase of methylene blue degradation from 67% to 94%, but further addition resulted in decrease of degradation.</span></p></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"45 12","pages":"Pages 14934-14942"},"PeriodicalIF":5.6000,"publicationDate":"2019-08-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/j.ceramint.2019.04.229","citationCount":"52","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884219310661","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 52

Abstract

In the present study, NiO–ZnO–Ag photocatalytic nanocomposites were synthesized using two-stage precipitation method. The synthesized composite powders were investigated and characterized using different techniques including XRD, FESEM, FT-IR, TGA and UV–Vis. XRD results showed that by increasing the Ag content, the crystallite size of ZnO decreased. FESEM micrographs showed that addition of Ag could lead to formation of more uniform particles in the size range of 30–500 nm. Diffuse reflectance spectroscopy results confirmed that addition of Ag nanoparticles led to the increase of light absorption, which was attributed to the plasmon surface resonance of Ag. Band gap energies of NiO–ZnO, NiO–ZnO–5%Ag, NiO–ZnO–3%Ag, NiO–ZnO–1%Ag and ZnO–1%Ag were estimated to be 3.13, 3.14, 3.147, 3.19 and 3.17 eV, respectively. Investigation of degradation process showed that by adding up to 1 wt% Ag to NiO–ZnO composite led to the increase of methylene blue degradation from 67% to 94%, but further addition resulted in decrease of degradation.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
ni - zno - ag纳米复合材料降解亚甲基蓝染料的快速合成及研究
本研究采用两段沉淀法合成了ni - zno - ag光催化纳米复合材料。采用XRD、FESEM、FT-IR、TGA、UV-Vis等技术对合成的复合粉体进行了表征。XRD结果表明,随着Ag含量的增加,ZnO的晶粒尺寸减小。FESEM显微图显示,Ag的加入可以形成更均匀的粒径在30-500 nm范围内的颗粒。漫反射光谱结果证实,Ag纳米粒子的加入导致了光吸收的增加,这归因于Ag的等离子体表面共振。NiO-ZnO、NiO-ZnO - 5% ag、NiO-ZnO - 3% ag、NiO-ZnO - 1% ag和ZnO-1%Ag的带隙能分别为3.13、3.14、3.147、3.19和3.17 eV。降解过程研究表明,在NiO-ZnO复合材料中添加1 wt%的Ag可使亚甲基蓝的降解率从67%提高到94%,但添加量越高,亚甲基蓝的降解率越低。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Ceramics International
Ceramics International 工程技术-材料科学:硅酸盐
CiteScore
9.40
自引率
15.40%
发文量
4558
审稿时长
25 days
期刊介绍: Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties. Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour. Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.
期刊最新文献
Mechanical and electromagnetic wave absorption properties of SiCsf/Y2Si2O7 composites Titanium carbide nanofiber membranes with superior photothermal conversion for high-efficiency sunlight-driven thermoelectric generators On the photoluminescence differences of Eu3+-activated layered perovskite La2Ti2O7 and A2La2Ti3O10 (A = Li, Na, K) phosphors for potential applications in white LEDs and plant growth lighting Redox-stable BaB4O7–BaB8O13 eutectic for low-temperature sintering of shale–coal gangue ceramic bricks: From lab-scale synthesis to pilot-scale validation Thermal/mechanical properties and CMAS corrosion resistance of (YGdErDy)2(1-x)Yb2xZr2O7 high-entropy ceramics
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1