Finite element simulation of low velocity impact on shape memory alloy composite plates

Abstract

Delamination of composite materials due to low velocity impacts is one of the major failure types of aerospace composite structures. The low velocity impact may not immediately induce any visible damage on the surface of structures whilst the stiffness and compressive strength of the structures can decrease dramatically.

Shape memory alloy (SMA) materials possess unique mechanical and thermal properties compared with conventional materials. Many studies have shown that shape memory alloy wires can absorb a lot of the energy during the impact due to their superelastic and hysteretic behaviour. The superelastic effect is due to reversible stress induced transformation from austenite to martensite. If a stress is applied to the alloy in the austenitic state, large deformation strains can be obtained and stress induced martensite is formed. Upon removal of the stress, the martensite reverts to its austenitic parent phase and the SMA undergoes a large hysteresis loop and a large recoverable strain is obtained. This large strain energy absorption capability can be used to improve the impact tolerance of composites. By embedding superelastic shape memory alloys into a composite structure, impact damage can be reduced quite significantly.

This article investigates the impact damage behaviour of carbon fiber/epoxy composite plates embedded with superelastic shape memory alloys wires. The results show that for low velocity impact, embedding SMA wires into composites increase the damage resistance of the composites when compared to conventional composites structures.