Random Fatigue Analysis of Cryogenic Liquid Tanker Under Road Spectrum Load and a Simplified Algorithm

IF 1 4区 工程技术 Q4 ENGINEERING, MECHANICAL Journal of Pressure Vessel Technology-Transactions of the Asme Pub Date : 2023-03-11 DOI:10.1115/1.4062122
Bingjun Gao, Tong Wang, Xinghua Fu, J. Dong, Xu Chen, Chu-lin Yu
{"title":"Random Fatigue Analysis of Cryogenic Liquid Tanker Under Road Spectrum Load and a Simplified Algorithm","authors":"Bingjun Gao, Tong Wang, Xinghua Fu, J. Dong, Xu Chen, Chu-lin Yu","doi":"10.1115/1.4062122","DOIUrl":null,"url":null,"abstract":"\n The lightweight of liquefied natural gas(LNG) tanker can reduce transportation cost and improve transportation efficiency. However, in lightweight design, the random vibration analysis based on fluid-structure interaction(FSI) is difficult, which demands to be effectively solved by simplifying the finite element model and load. The vibration test and fluid-structure interaction modal numerical analysis of a tanker model were carried out respectively, and the results are in good agreement. Taking the DC18 LNG tanker as an example, the random vibration response analysis was carried out based on the fluid-structure interaction modal numerical analysis, and the random fatigue damage coefficient of the support region of the inner container was obtained, which was used as the benchmark for the model and load simplification. The finite element model of the LNG tanker was simplified by applying the equivalent liquid mass to the walls of the inner container in the form of density. It is found that when the equivalent liquid mass ratio is 40%, the random vibration response characteristics of the DC18 LNG tanker are close to the actual structure. In the static calculation of the simplified model, the stress response of the container support area is close to the actual structural when the equivalent road spectrum load is 0.95g vertical acceleration. In this case, the stress result and the overall damage coefficient equivalent to the actual structure can be obtained just by static calculation, which greatly simplifies the solution process.","PeriodicalId":50080,"journal":{"name":"Journal of Pressure Vessel Technology-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":1.0000,"publicationDate":"2023-03-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Pressure Vessel Technology-Transactions of the Asme","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1115/1.4062122","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

The lightweight of liquefied natural gas(LNG) tanker can reduce transportation cost and improve transportation efficiency. However, in lightweight design, the random vibration analysis based on fluid-structure interaction(FSI) is difficult, which demands to be effectively solved by simplifying the finite element model and load. The vibration test and fluid-structure interaction modal numerical analysis of a tanker model were carried out respectively, and the results are in good agreement. Taking the DC18 LNG tanker as an example, the random vibration response analysis was carried out based on the fluid-structure interaction modal numerical analysis, and the random fatigue damage coefficient of the support region of the inner container was obtained, which was used as the benchmark for the model and load simplification. The finite element model of the LNG tanker was simplified by applying the equivalent liquid mass to the walls of the inner container in the form of density. It is found that when the equivalent liquid mass ratio is 40%, the random vibration response characteristics of the DC18 LNG tanker are close to the actual structure. In the static calculation of the simplified model, the stress response of the container support area is close to the actual structural when the equivalent road spectrum load is 0.95g vertical acceleration. In this case, the stress result and the overall damage coefficient equivalent to the actual structure can be obtained just by static calculation, which greatly simplifies the solution process.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
道路谱载荷下低温液罐车随机疲劳分析及简化算法
液化天然气(LNG)油轮的轻量化可以降低运输成本,提高运输效率。然而,在轻量化设计中,基于流固耦合的随机振动分析是一个难点,需要通过简化有限元模型和简化载荷来有效解决。对某油轮模型进行了振动试验和流固耦合模态数值分析,结果吻合较好。以DC18 LNG油轮为例,在流固耦合模态数值分析的基础上进行随机振动响应分析,得到内容器支撑区域的随机疲劳损伤系数,以此作为模型和荷载简化的基准。将等效液体质量以密度的形式应用于内容器壁面,简化了LNG罐车的有限元模型。研究发现,当等效液质比为40%时,DC18 LNG油轮的随机振动响应特性与实际结构较为接近。在简化模型的静力计算中,等效道路谱荷载为0.95g垂直加速度时,集装箱支撑区域的应力响应与实际结构接近。在这种情况下,只需静力计算即可得到与实际结构等效的应力结果和整体损伤系数,大大简化了求解过程。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
2.10
自引率
10.00%
发文量
77
审稿时长
4.2 months
期刊介绍: The Journal of Pressure Vessel Technology is the premier publication for the highest-quality research and interpretive reports on the design, analysis, materials, fabrication, construction, inspection, operation, and failure prevention of pressure vessels, piping, pipelines, power and heating boilers, heat exchangers, reaction vessels, pumps, valves, and other pressure and temperature-bearing components, as well as the nondestructive evaluation of critical components in mechanical engineering applications. Not only does the Journal cover all topics dealing with the design and analysis of pressure vessels, piping, and components, but it also contains discussions of their related codes and standards. Applicable pressure technology areas of interest include: Dynamic and seismic analysis; Equipment qualification; Fabrication; Welding processes and integrity; Operation of vessels and piping; Fatigue and fracture prediction; Finite and boundary element methods; Fluid-structure interaction; High pressure engineering; Elevated temperature analysis and design; Inelastic analysis; Life extension; Lifeline earthquake engineering; PVP materials and their property databases; NDE; safety and reliability; Verification and qualification of software.
期刊最新文献
On The Strength And Tightness Of Asme B16.5 And B16.47 Series A Standard Flanges A Re-Evaluation of Rupture Data for CF8C-Plus Austenitic Stainless Steel Mechanical Properties of Buried Steel Pipe With Polyurethane Isolation Layer Under Strike-Slip Fault An Improved Fixture to Quantify Corrosion in Bolted Flanged Gasketed Joints Methods For Estimating Hydrogen Fuel Tank Characteristics
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1