Crack prediction in pipeline using ANN-PSO based on numerical and experimental modal analysis

IF 2.1 3区 工程技术 Q2 ENGINEERING, CIVIL Smart Structures and Systems Pub Date : 2021-03-01 DOI:10.12989/SSS.2021.27.3.507
M. Seguini, S. Khatir, D. Boutchicha, D. Nedjar, M. Wahab
{"title":"Crack prediction in pipeline using ANN-PSO based on numerical and experimental modal analysis","authors":"M. Seguini, S. Khatir, D. Boutchicha, D. Nedjar, M. Wahab","doi":"10.12989/SSS.2021.27.3.507","DOIUrl":null,"url":null,"abstract":"In this paper, a crack identification using Artificial Neural Network (ANN) is investigated to predict the crack depth in pipeline structure based on modal analysis technique using Finite Element Method (FEM). In various fields, ANN has become one of the most effective instruments using computational intelligence techniques to solve complex problems. This paper uses Particle Swarm Optimization (PSO) to enhance ANN training parameters (bias and weight) by minimizing the difference between actual and desired outputs and then using these parameters to generate the network. The convergence study during the process proves the advantage of using PSO based on two selected parameters. The data are collected from FEM based on different crack depths and locations. The provided technique is validated after collecting the data from experimental modal analysis. To study the effectiveness of ANN-PSO, different hidden layers values are considered to study the sensitivity of the predicted crack depth. The results demonstrate that ANN combined with PSO (ANN-PSO) is accurate and requires a lower computational time in terms of crack identification based on inverse problem.","PeriodicalId":51155,"journal":{"name":"Smart Structures and Systems","volume":"27 1","pages":"507"},"PeriodicalIF":2.1000,"publicationDate":"2021-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"9","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Smart Structures and Systems","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.12989/SSS.2021.27.3.507","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 9

Abstract

In this paper, a crack identification using Artificial Neural Network (ANN) is investigated to predict the crack depth in pipeline structure based on modal analysis technique using Finite Element Method (FEM). In various fields, ANN has become one of the most effective instruments using computational intelligence techniques to solve complex problems. This paper uses Particle Swarm Optimization (PSO) to enhance ANN training parameters (bias and weight) by minimizing the difference between actual and desired outputs and then using these parameters to generate the network. The convergence study during the process proves the advantage of using PSO based on two selected parameters. The data are collected from FEM based on different crack depths and locations. The provided technique is validated after collecting the data from experimental modal analysis. To study the effectiveness of ANN-PSO, different hidden layers values are considered to study the sensitivity of the predicted crack depth. The results demonstrate that ANN combined with PSO (ANN-PSO) is accurate and requires a lower computational time in terms of crack identification based on inverse problem.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于数值和实验模态分析的ANN-PSO管道裂纹预测方法
本文研究了基于有限元模态分析技术,利用人工神经网络(ANN)识别管道结构裂纹深度的方法。在各个领域,人工神经网络已经成为利用计算智能技术解决复杂问题的最有效工具之一。本文采用粒子群优化(PSO)方法,通过最小化实际输出和期望输出之间的差值来增强人工神经网络的训练参数(偏置和权值),然后使用这些参数来生成网络。过程中的收敛性研究证明了基于两个选定参数的粒子群算法的优越性。基于不同的裂纹深度和位置,采用有限元法收集数据。通过对试验模态分析数据的收集,验证了该方法的有效性。为了研究ANN-PSO算法的有效性,考虑了不同隐层值对预测裂纹深度的敏感性。结果表明,在基于逆问题的裂纹识别中,神经网络与粒子群算法相结合(ANN-PSO)具有较好的精度和较低的计算时间。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Smart Structures and Systems
Smart Structures and Systems 工程技术-工程:机械
CiteScore
6.50
自引率
8.60%
发文量
0
审稿时长
9 months
期刊介绍: An International Journal of Mechatronics, Sensors, Monitoring, Control, Diagnosis, and Management airns at providing a major publication channel for researchers in the general area of smart structures and systems. Typical subjects considered by the journal include: Sensors/Actuators(Materials/devices/ informatics/networking) Structural Health Monitoring and Control Diagnosis/Prognosis Life Cycle Engineering(planning/design/ maintenance/renewal) and related areas.
期刊最新文献
Analysis, optimization and control of an adaptive tuned vibration absorber featuring magnetoactive materials Numerical investigation on cyclic behaviour of superelastic shape memory alloy (SMA) dampers Hybrid fragility curve derivation of buildings based on post-earthquake reconnaissance data A corrosion threshold-controllable sensing system of Fe-C coated long period fiber gratings for life-cycle mass loss measurement of steel bars with strain and temperature compensation Steel dual-ring dampers: Micro-finite element modelling and validation of cyclic behavior
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1