Energy storehouse and a remarkable photocatalyst: Al2S3/Cu2S/Ni17S18 thin film as supercapacitor electrode and pollutants degradation

IF 2.4 4区 材料科学 Q3 MATERIALS SCIENCE, COATINGS & FILMS Surface Engineering Pub Date : 2023-03-04 DOI:10.1080/02670844.2023.2223453
M. M. Gul, K. Ahmad
{"title":"Energy storehouse and a remarkable photocatalyst: Al2S3/Cu2S/Ni17S18 thin film as supercapacitor electrode and pollutants degradation","authors":"M. M. Gul, K. Ahmad","doi":"10.1080/02670844.2023.2223453","DOIUrl":null,"url":null,"abstract":"ABSTRACT Fabrication of the tri metal sulphide Al2S3-Cu2S-Ni17S18 thin film was achieved by physical vapour deposition. The synthesised material was fully characterised by XRD, SEM, EDX, UV-visible spectrophotometer and FTIR. A nanoscale ranged 23.5 nm average crystallite size was obtained for the ternary metal sulphide. A motley of clustered morphological particles was observed by SEM with the confirmation of the desired metals through energy dispersive X-ray. Band gap energy possessed by the ternary metal sulphide was 2.5 eV. The remarkable energy storing capability of the electrode was investigated by cyclic voltammetry, which presented a supercapacitance of 595 F g−1 expressing the pertinence of the synthesised material. Cycling stability of the nanoparticle thin film was also observed through the voltammetric analysis. Furthermore, the environmental applicability of the thin film was investigated by the photocatalytic degradation of pollutants with an impressive degradation rate constant 3.61 × 10−2 min−1 achieved for pesticide.","PeriodicalId":21995,"journal":{"name":"Surface Engineering","volume":"39 1","pages":"371 - 386"},"PeriodicalIF":2.4000,"publicationDate":"2023-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Surface Engineering","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/02670844.2023.2223453","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, COATINGS & FILMS","Score":null,"Total":0}
引用次数: 3

Abstract

ABSTRACT Fabrication of the tri metal sulphide Al2S3-Cu2S-Ni17S18 thin film was achieved by physical vapour deposition. The synthesised material was fully characterised by XRD, SEM, EDX, UV-visible spectrophotometer and FTIR. A nanoscale ranged 23.5 nm average crystallite size was obtained for the ternary metal sulphide. A motley of clustered morphological particles was observed by SEM with the confirmation of the desired metals through energy dispersive X-ray. Band gap energy possessed by the ternary metal sulphide was 2.5 eV. The remarkable energy storing capability of the electrode was investigated by cyclic voltammetry, which presented a supercapacitance of 595 F g−1 expressing the pertinence of the synthesised material. Cycling stability of the nanoparticle thin film was also observed through the voltammetric analysis. Furthermore, the environmental applicability of the thin film was investigated by the photocatalytic degradation of pollutants with an impressive degradation rate constant 3.61 × 10−2 min−1 achieved for pesticide.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
能量库和卓越的光催化剂:Al2S3/Cu2S/Ni17S18薄膜作为超级电容器电极和污染物降解
采用物理气相沉积方法制备了三金属硫化物Al2S3-Cu2S-Ni17S18薄膜。用XRD、SEM、EDX、紫外可见分光光度计和FTIR对合成的材料进行了表征。纳米级范围为23.5 获得了三元金属硫化物的平均晶粒尺寸为nm。通过SEM观察到混杂的聚集形态颗粒,通过能量分散的X射线证实了所需的金属。三元金属硫化物所具有的带隙能量为2.5 通过循环伏安法研究了电极的显著储能能力,其表现出595的超级电容 F g−1表示合成材料的相关性。通过伏安分析还观察了纳米颗粒薄膜的循环稳定性。此外,通过光催化降解污染物研究了薄膜的环境适用性,降解速率常数为3.61 × 农药达到10−2 min−1。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Surface Engineering
Surface Engineering 工程技术-材料科学:膜
CiteScore
5.60
自引率
14.30%
发文量
51
审稿时长
2.3 months
期刊介绍: Surface Engineering provides a forum for the publication of refereed material on both the theory and practice of this important enabling technology, embracing science, technology and engineering. Coverage includes design, surface modification technologies and process control, and the characterisation and properties of the final system or component, including quality control and non-destructive examination.
期刊最新文献
Examination of the metallization behaviour of an ABS surface Performance of electrochemically deposited hydroxyapatite on textured 316L SS for applications in biomedicine Vanadium promoted ZnO films: effects on optical and photocatalytic properties Preparation and frictional characteristics of solid lubrication coating on CFRP surface Laser surface texturing of dies in strip drawing of DP600 steel sheet
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1