Risk assessment in railway rolling stock planning

Q2 Engineering Archives of Transport Pub Date : 2023-03-31 DOI:10.5604/01.3001.0016.2817
P. Gołębiowski, Ignacy Góra, Y. Bolzhelarskyi
{"title":"Risk assessment in railway rolling stock planning","authors":"P. Gołębiowski, Ignacy Góra, Y. Bolzhelarskyi","doi":"10.5604/01.3001.0016.2817","DOIUrl":null,"url":null,"abstract":"Rolling stock planning is one of the steps in the traffic planning process considered from the railway undertaking's point of view. It is directly related to the efficiency of rolling stock utilisation, which should be ensured at the highest possible level in the case of rail transport. The planning work stage is subject to certain risks (threats and opportunities), which, if they materialise, will impact it. It, therefore, makes sense to carry out analyses that can anticipate specific events in good time and introduce appropriate countermeasures in advance. This article aims to conduct a risk assessment process concerning rolling stock planning. It was assumed that the considerations were carried out based on the M_o_R (Management of Risk) methodology. Based on this methodology, risk identifica-tion and risk analysis (estimation of risk impact) were carried out. Risk assessment was carried out using the Monte Carlo simulation method. The work identified sixteen risks that represent threats. The principle of risk description was used to identify risks. It requires indicating for each risk the reason for its occurrence and the effect it may have. As a part of risk estimation, variables were selected to assess each risk's impact on the objectives of the stage. Publicly available statistical data were used to define the variables. The variables were expressed in monetary units. The work identified five variables describing impact, which were assigned to the individual risks. As a trian-gular probability distribution was used for the variability of impact description, the variable's minimum, most likely, and maximum value was identified. A risk assessment was carried out for only two impact description varia-bles (for those variables used to describe the impact of the most significant number of risks). For each variable, statistical parameters were indicated and analysed. The resulting value of the variable describing the impact was then read out for each percentile, and the expected value of the risk was calculated. A detailed risk assessment was made for the lower, middle and upper quartiles. A histogram of the incidence of each variable value was presented, and an assessment was made.","PeriodicalId":53541,"journal":{"name":"Archives of Transport","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-03-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Archives of Transport","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5604/01.3001.0016.2817","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 1

Abstract

Rolling stock planning is one of the steps in the traffic planning process considered from the railway undertaking's point of view. It is directly related to the efficiency of rolling stock utilisation, which should be ensured at the highest possible level in the case of rail transport. The planning work stage is subject to certain risks (threats and opportunities), which, if they materialise, will impact it. It, therefore, makes sense to carry out analyses that can anticipate specific events in good time and introduce appropriate countermeasures in advance. This article aims to conduct a risk assessment process concerning rolling stock planning. It was assumed that the considerations were carried out based on the M_o_R (Management of Risk) methodology. Based on this methodology, risk identifica-tion and risk analysis (estimation of risk impact) were carried out. Risk assessment was carried out using the Monte Carlo simulation method. The work identified sixteen risks that represent threats. The principle of risk description was used to identify risks. It requires indicating for each risk the reason for its occurrence and the effect it may have. As a part of risk estimation, variables were selected to assess each risk's impact on the objectives of the stage. Publicly available statistical data were used to define the variables. The variables were expressed in monetary units. The work identified five variables describing impact, which were assigned to the individual risks. As a trian-gular probability distribution was used for the variability of impact description, the variable's minimum, most likely, and maximum value was identified. A risk assessment was carried out for only two impact description varia-bles (for those variables used to describe the impact of the most significant number of risks). For each variable, statistical parameters were indicated and analysed. The resulting value of the variable describing the impact was then read out for each percentile, and the expected value of the risk was calculated. A detailed risk assessment was made for the lower, middle and upper quartiles. A histogram of the incidence of each variable value was presented, and an assessment was made.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
铁路车辆规划中的风险评价
从铁路企业的角度来看,车辆规划是交通规划过程中的一个步骤。它直接关系到机车车辆的利用效率,在铁路运输的情况下,应确保在尽可能高的水平。规划工作阶段受到某些风险(威胁和机会)的影响,如果这些风险成为现实,将对规划工作产生影响。因此,进行能够及时预测具体事件并提前提出适当对策的分析是有意义的。本文旨在对铁路车辆规划进行风险评估。假定这些考虑是根据M_o_R(风险管理)方法进行的。基于该方法,进行了风险识别和风险分析(风险影响估计)。采用蒙特卡罗模拟法进行风险评估。这项工作确定了16个代表威胁的风险。采用风险描述原则对风险进行识别。它要求对每一种风险指出其发生的原因及其可能产生的影响。作为风险估计的一部分,选择变量来评估每个风险对阶段目标的影响。使用公开可用的统计数据来定义变量。变量以货币单位表示。这项工作确定了描述影响的五个变量,并将其分配给个体风险。由于冲击性描述的可变性采用三角概率分布,因此确定了变量的最小值、最可能值和最大值。仅对两个影响描述变量(用于描述最显著数量风险的影响的那些变量)进行了风险评估。对于每个变量,都给出了统计参数并进行了分析。然后为每个百分位数读出描述影响的变量的结果值,并计算风险的期望值。对低、中、高四分位数进行了详细的风险评估。给出了每个变量值的发生率直方图,并进行了评估。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Archives of Transport
Archives of Transport Engineering-Automotive Engineering
CiteScore
2.50
自引率
0.00%
发文量
26
审稿时长
24 weeks
期刊最新文献
Proactive safety assessment of urban through-roads based on GPS data The Multidimensional Threats of Unmanned Aerial Systems: Exploring Biomechanical, Technical, Operational, and Legal Solutions for Ensuring Safety and Security Predicting severe wildlife vehicle crashes (WVCs) on New Hampshire roads using a hybrid generalized additive model Research on port AGV trajectory tracking control based on improved fuzzy sliding mode control Suitable law-based location selection of high-power electric vehicles charging stations on the TEN-T core network for sustainability: a case of Poland
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1