Assessing 2 by 6 Southern Pine Lumber Flexural and Tensile Properties with Nondestructive Techniques

Abstract

The objective of this study was to assess the flexural and tensile properties of 702 pieces of No. 2 grade 2 by 6 southern pine lumber using nondestructive testing (NDT) techniques. Longitudinal and transverse vibration techniques were used to test each specimen. The mean dynamic modulus of elasticity in the longitudinal direction was 11,246 MPa, and the mean transverse vibration dynamic modulus of elasticity was 11,491 MPa. Proof-loading bending tests were conducted on each specimen. The mean bending modulus of elasticity (MOE) was 10,615 MPa. Each specimen was then destructively tested in tension parallel to the grain to determine tension MOE (Et) and ultimate tensile stress (UTS). The overall mean for Et was 11,339 MPa and the UTS mean was 28.54 MPa. Correlations between growth characteristics, and physical and mechanical properties were analyzed. From the linear regression analysis, a strong relationship between Et and dynamic MOE was found using both NDT tools. Multivariable regression models were developed to improve UTS estimation. NDT techniques are recommended for the estimation of mechanical properties of No. 2 grade 2 by 6 southern pine lumber.