Actuating performance for functionally graded piezoelectric materials with interdigitated electrodes

IF 1.7 4区 材料科学 Q2 MATERIALS SCIENCE, CERAMICS Journal of Electroceramics Pub Date : 2023-01-07 DOI:10.1007/s10832-022-00299-2
Isabelle Bruant, Romain Carpentier, Mohamed Fat’hi, Frédéric Pablo
{"title":"Actuating performance for functionally graded piezoelectric materials with interdigitated electrodes","authors":"Isabelle Bruant,&nbsp;Romain Carpentier,&nbsp;Mohamed Fat’hi,&nbsp;Frédéric Pablo","doi":"10.1007/s10832-022-00299-2","DOIUrl":null,"url":null,"abstract":"<div><p>In this article, the actuating performance for functionally graded piezoelectric materials (FGPM) using the <span>\\(d_{33}\\)</span> mode actuation is investigated. The material properties vary continuously across the thickness direction, according to a fraction volume power law distribution, so that top and bottom surfaces consist of pure PZTG and the mid surface is composed of pure aluminium. The percolation phenomenon is taken into account. The optimization of the interdigitated electrode (IDE) design for FGPM is performed using finite element analysis. Several design parameters (electrodes number, width and spacing) are considered to improve the produced displacement for a cantilever plate, and the use of multilayered IDE is intended. Results are discussed for several distributions of the components in the FGPM thickness. A comparison with the <span>\\(d_{31}\\)</span> mode actuation is presented.</p></div>","PeriodicalId":625,"journal":{"name":"Journal of Electroceramics","volume":"50 1","pages":"11 - 22"},"PeriodicalIF":1.7000,"publicationDate":"2023-01-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s10832-022-00299-2.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Electroceramics","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s10832-022-00299-2","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0

Abstract

In this article, the actuating performance for functionally graded piezoelectric materials (FGPM) using the \(d_{33}\) mode actuation is investigated. The material properties vary continuously across the thickness direction, according to a fraction volume power law distribution, so that top and bottom surfaces consist of pure PZTG and the mid surface is composed of pure aluminium. The percolation phenomenon is taken into account. The optimization of the interdigitated electrode (IDE) design for FGPM is performed using finite element analysis. Several design parameters (electrodes number, width and spacing) are considered to improve the produced displacement for a cantilever plate, and the use of multilayered IDE is intended. Results are discussed for several distributions of the components in the FGPM thickness. A comparison with the \(d_{31}\) mode actuation is presented.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
交错电极功能梯度压电材料的致动性能
本文研究了功能梯度压电材料(FGPM)在\(d_{33}\)模式下的致动性能。根据分数体积幂律分布,材料性能在厚度方向上连续变化,因此上下表面由纯PZTG组成,中表面由纯铝组成。考虑了渗流现象。采用有限元分析方法对FGPM的插指电极(IDE)设计进行了优化。考虑了几个设计参数(电极数、宽度和间距)来改善悬臂板的产生位移,并打算使用多层IDE。结果讨论了组分在FGPM厚度中的几种分布。并与\(d_{31}\)模式作了比较。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Electroceramics
Journal of Electroceramics 工程技术-材料科学:硅酸盐
CiteScore
2.80
自引率
5.90%
发文量
22
审稿时长
5.7 months
期刊介绍: While ceramics have traditionally been admired for their mechanical, chemical and thermal stability, their unique electrical, optical and magnetic properties have become of increasing importance in many key technologies including communications, energy conversion and storage, electronics and automation. Electroceramics benefit greatly from their versatility in properties including: -insulating to metallic and fast ion conductivity -piezo-, ferro-, and pyro-electricity -electro- and nonlinear optical properties -feromagnetism. When combined with thermal, mechanical, and chemical stability, these properties often render them the materials of choice. The Journal of Electroceramics is dedicated to providing a forum of discussion cutting across issues in electrical, optical, and magnetic ceramics. Driven by the need for miniaturization, cost, and enhanced functionality, the field of electroceramics is growing rapidly in many new directions. The Journal encourages discussions of resultant trends concerning silicon-electroceramic integration, nanotechnology, ceramic-polymer composites, grain boundary and defect engineering, etc.
期刊最新文献
Honoring a Legacy – Heartfelt Thanks to Our Former Editor-in-Chief! Efficient acetone sensing utilizing Co3O4-Embedded porous ZnO nanofibers MgTiO3-based ceramics for enhanced EMI shielding solutions in K and Ka frequency bands Structural, dielectric, and electrical studies of Sm-doped Sr0.95Ba0.05Bi2Nb2O9 lead-free relaxor ceramics Spark plasma sintering of cerium (IV) oxide under a carbon dioxide atmosphere
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1